Fujitsu AOU36T Cleaning the Intake Grille Open the Intake Grille, Unlock the Intake Grille

Page 22

Cleaning the Intake Grille

1.Open the Intake Grille.

1 Place your fingers at both lower ends of the grille panel, and lift forward; if the grille seems to catch

partway through its movement, continue lifting up- ward to remove.

2 Pull past the intermediate catch and open the Intake Grille wide so that it becomes horizontal.

Intake Grille

2. Unlock the Intake Grille.

Hold the Intake Grille with one hand and pull the Knobs on the right and the left all the way to unlock the Intake Grille.

Intake Grille

Mounting shaft

Knob

Raise the horizontal Intake Grille to remove it.

3. Clean with water.

Remove dust with a vacuum cleaner: wipe the unit with warm water, then dry with a clean, soft cloth.

4. Set the mounting shaft of the Intake Grille into the bearings at the top of the panel.

1 Pull the Knobs all the way.

2 Hold the grille horizontal and set the left and right mounting shafts into the bearings at the top of the panel.

Mounting shaft

Bearing

Intake

Grille

Knob

5. Lock the Intake Grille.

Hold the Intake Grille with one hand and push the Knobs on the right and the left all the way in to lock the Intake Grille mounting shafts.

Intake Grille

Mounting shaft

Knob

6. Close the Intake Grille.

Push the lower edge of the Intake Grille at both ends and at the center to close it.

Intake Grille

CAUTION!

Do not operate with open Intake Grille, as this can cause accidents.

En-21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents AOU36T Multi Split Type 3 RoomsASU18T EnglishContents Safety PrecautionsFeatures and Functions AIR Cleaning Filter OptionalPage Name of Parts Name of Parts En-5Time Adjust Button S Test RUN Button Outdoor Unit Intake Side F Outlet SideRemote Control Unit Holder Press the Time Adjust button againTo Use the Remote Control Unit PreparationPreparation To Set the Thermostat Press the SET TEMP. buttons L To Select Mode Operation Press the START/STOP button POperation To Set the Fan Speed Press the FAN Control button ODuring Fan mode To Set the Thermostat Press the Temperature set buttonDuring Cooling/Dry mode To Stop Operation Press the START/STOP buttonTo Set the Thermostat Press the SET TEMP. buttons To Select Mode Operation Press the START/STOP buttonOperation To Set the Fan Speed Press the FAN Control buttonAbout Mode Operation To Use the Program timer Press the START/STOP button Timer OperationSet the desired times for OFF timer and on timer About the on timer Sleep Timer OperationAbout the Program timer About the Sleep timerAdjusting the Direction of AIR Circulation Types of Air flow Direction SettingAdjusting the Direction of AIR Circulation Right-Left Adjustment Adjust the Right-Left louversManual Auto Operation Swing OperationTo select Swing Operation Press the Swing Louver button R To Stop Horizontal airflow Swing Operation Swing OperationTo Stop Vertical airflow Swing Operation About Swing OperationManual Auto Operation Energy Save OperationAbout the Energy Save Cleaning and Care Unlock the Intake Grille Cleaning the Intake Grille Open the Intake GrilleClean with water Lock the Intake GrilleTroubleshooting Symptom ProblemEn-23 Temperature and Humidity Range Operating Tips

ASU18T, Room Air Conditioner Multi Split Type (3 rooms), AOU36T specifications

The Fujitsu AOU36T is a highly efficient multi-split room air conditioning system designed to provide optimal comfort across three rooms. Its versatility and advanced technology make it an ideal solution for residential and commercial spaces. With a combination of the outdoor unit (AOU36T) and indoor units (ASU18T), this system showcases Fujitsu's commitment to quality and performance.

One of the main features of the AOU36T system is its energy efficiency, classified with a high SEER (Seasonal Energy Efficiency Ratio) rating. This means it consumes less energy while delivering powerful cooling and heating output, making it an environmentally friendly choice that also reduces utility bills. The unit is equipped with inverter technology, which allows the compressor to adjust its speed based on the cooling needs of the spaces, leading to quieter operation and increased energy savings.

The ASU18T indoor units feature a sleek and modern design that seamlessly integrates into various interior aesthetics. They are equipped with advanced air filtration systems to ensure clean and healthy air is circulated within the rooms. The filters capture dust, allergens, and other pollutants, enhancing indoor air quality, an essential aspect for families and individuals with respiratory issues.

An important characteristic of the Fujitsu AOU36T system is its ultra-quiet operation. The outdoor unit is designed to minimize noise levels, while the indoor units also operate quietly, ensuring that the comfort is not disrupted by loud mechanical sounds. This feature makes it perfect for bedrooms, offices, and other noise-sensitive environments.

The multi-split system also includes smart technology features, allowing users to control the temperature and settings remotely using a smartphone app. This provides convenience and flexibility, enabling adjustments based on individual preferences and schedules.

Moreover, the AOU36T supports heating functionality, making it a reliable choice for year-round climate control. It can effectively manage heating needs even in colder temperatures, providing warmth and comfort during winter months.

In conclusion, the Fujitsu AOU36T multi-split air conditioning system with ASU18T indoor units offers a comprehensive solution for effective climate control in multiple rooms. Its combination of energy efficiency, advanced technology, quiet operation, and smart features make it an excellent choice for those seeking comfort without compromising on performance or environmental responsibility.
Top Page Image Contents