Goodman Mfg GKS9 service manual Do not connect or use any device

Page 3

PRODUCT IDENTIFICATION

The model and manufacturing number are used for positive identification of component parts used in manufacturing. When engineering and manufacturing changes take place where interchangeability of components are affected, the manufactur- ing number will change.

GKS90453BX*

GKS90703BX*

GKS90704CX*

GKS90904CX*

GKS90905DX*

GKS91155DX*

* Indicates minor revision & is not used for order entry or inventory management

WARNING

The United States Environmental Protection Agency (“EPA”) has issued various regulations re-

garding the introduction and disposal of refrigerants introduced into this unit. Failure to follow

 

these regulations may harm the environment and can lead to the imposition of substantial fines.

 

These regulations may vary by jurisdiction. Should questions arise, contact your local EPA office.

 

 

WARNING

Do not connect or use any device

that is not design certified by

 

Goodman for use with this unit.

Serious property damage, personal injury, reduced unit performance and/or hazardous conditions may result from the use of such non-approved devices.

WARNING To prevent the risk of property damage, personal injury, or death, do not store combustible materials or use gasoline or

other flammable liquids or vapors in the vicinity of this appliance.

3

Image 3
Contents Technical Manual Product Identification 045Do not connect or use any device General Operation Product DesignCompartment Burner Blower Component IdentificationGKS9 Pressure Switch Trip Points and Usage Chart Rollout Limit Switches Auxiliary Limit SwitchesD. Primary Limit 1824 Bottom Return Side ReturnModel GKS9 Furnace SpecificationsBlower Performance Blower Performance SpecificationsPerformance Specifications GKS9*****X Wiring Diagrams