GENERAL OPERATION
TURNING THE UNIT ON/OFF Turning on the Player
After all connections are completed correctly, slide the switch on the side of the DVD unit to open the monitor. Slide the POWER switch on the side of the DVD unit from OFF to ON to turn on the unit. The power indicator PWR on the DVD unit will turn green. When the unit is on, it will search the disc automatically. If there is a disc in the disc slot, the unit will start playback automatically.
Turning off the Player
When the power is on, slide the POWER switch on the side of the DVD unit to OFF to turn off the power and the power indicator will turn off.
Note:
The unit has screen saver function (select “ON” in Screen Saver setup). If the playback is stopped and there is not any button operation for 5 minutes, it will activate the screen saver function automatically; when any button for DVD function is pressed, the screen saver function will release automatically. When the unit is working, turn the monitor downward and push the montior back into the monitor base unit until the screen engages with the switch on the DVD unit. Then there is no sound from the speakers but the earphone has sound output.
Remote Sensor
To control functions using the remote control point the control at the remote sensor on the DVD unit.
Loading a Disc
When the monitor is turned upward and the unit is on. Slide the OPEN switch on DVD unit to open the disc cover. With the printed side facing up, align the center of the disc with the center of the disc guide. Press gently down on the DVD to snap the disc into place. Close the disc cover, then the player will start play automatically.
Monitor
Disc Cover
Open Switch
Power Switch
Removing a Disc
When the disc stops playing, Slide the OPEN switch on the DVD unit to open the disc cover, then you can remove the disc.
BASIC PLAY
Stopping Playback
-Press STOP button on the DVD unit or 
button on the remote control one time to 
button on the front panel or 
button on the remote control is pressed, normal playback will continue.
-Press 
button twice to stop the playback and go back to the DVD LOGO.
Pausing Play
Pressing 
on the remote control or pressing 
on the DVD unit during playback will stop playback temporarily. To return to normal playback, press 
again.
RAPID FORWARD/RAPID REVERSE Press 
& 
during playback.
Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follows.
DVD:
Normal Playback 
X2 
X4 
X16
X100
VCD/CD/MP3:
Normal Playback 
X2 
X4 
X8
12