ELECTRICAL CONNECTION
A. Powering and installation
1.Powering the system indoors (Refer to Figure 1) Plug one end of the AC to DC adapter into the DC jack on the right side ofthe main unit, then plug the other end into the 120V AC power outlet.
2.Powering the system in a car (refer to Figure 1) Plug one end of the cigarette lighter adapter into the DC jack on the unit, thenplug the other end into the cigarette lighter socket.
Note: Unplug the apparatus from the power source when not in use foran extended period of time.
B. Connecting to Other Equipment 1. AV Out
Connecting with a TV or another monitor (Refer to Figure 2)
Connect the small end of the supplied video cable into the unit's VIDEO OUPUT jack and connect the other end to the VIDEO INPUT jack on your TV or Monitor through an optional RCA cable (Yellow = Video).
Connect the small end of the supplied audio cable into the unit's AUDIO OUTPUT jack and connect the other end to the AUDIO INPUT jacks on your TV or MONITOR through an optional RCA cable (white = left channel, red = right channel).
Figure 2
optional RCA cable (Yellow = Video). Connect the small end of the supplied audio cable into the unit's AUDIO INPUT jack and connect the other end to the AUDIO OUTPUT jacks on your Game or Camcorder through an optional RCA cable (white = left channel, red = right channel).
Figure 3
NOTICE:
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in ‘park’ or when the vehicle ’s parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver ’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.
2. AV In
Using “AV Jacks” connecting to a Game or Camcorder.( Refer to Figure 3)
a. Slide the AV IN/DVD switch to AV IN Connect the small end of the supplied video cable into the unit's VIDEO INPUT jack and connect the other end to the VIDEO OUTPUT jack on your Game or Camcorder through an
8