Trane Model 180 GEV manual Hanging Device 1/2 to 5-ton, Hanging Device 6 to 12-1/2-ton, Drain Pan

Page 12

R

Features and Benefits

Hanging Device: 1/2 to 5-ton

The hanging bracket resides in the chamfered corner of the horizontal 1/2 to 5 ton equipment. This partially-concealed bracket design eliminates added height, width, or length to the product. The brackets are factory mounted to shorten job installation requirements.

The structural integrity of the design helps assure no bracket deflection or unit bowing from the unit’s weight.

Field return-air hook-up and filter main- tenance are more simplistic. Isolation for the hanging bracket is provided with a neoprene rubber grommet design. This isolation device helps prevent sound vibration from reaching the structural support members of the building during compressor start and stop. See Figure 7 for isolation device.

Hanging Device: 6 to 12-1/2-ton

The hanging channel for the horizontal unit runs the length of the equipment. The structural integrity of the design helps assure no bracket deflection or unit bowing from the unit’s weight. Optional isolation for the hanging brack- et is provided with a itrile rubber grom- met design. This isolation device helps prevent sound vibration from reaching the structural support members of the building during compressor start and stop.

Access Panels: 12-1/2 to 20-ton

The upper panels of the 12 1/2 through 20-ton verticals feature a key hole hang- ing design for ease of maintenance of the unit, allowing the panel to be hooked into place when attaching the panel to the unit. The panels are also sealed with a rubber gasket at all four edges to help eliminate air from escaping around the panel’s edge. See Figure 8 for GEV panel design.

Drain Pan

The unit drain pan is composed of plas- tic, corrosive resistive material. The pan is positively sloped to comply with ASHRAE 62 for (IAQ) indoor air quality conformity. See Figure 9 to view the plastic drain pan.

Cabinet Insulation

All model cabinet insulation design meets UL 181 requirements. The air stream surface of the insulation is fabri- cated of a non-biodegradable source.

Refrigeration Piping

The unit’s copper tubing is created from a 99% pure copper formation that con- forms to the American Society of Testing (ASTM) B743 for seamless, light- annealed processing.

The unit’s copper refrigeration system is designed to be free from contaminants and conditions such as drilling frag- ments, dirt, or oil. This excludes the pos- sibility of these contaminants from dam- aging the compressor motor.

Compressor: 1/2 to 5-ton

The unit’s design includes a wide variety of compressor motors to accommodate dedicated voltages and tonnage sizes.

For more details, See General Data Tables, pages 5-7.

Figure 7: Hanging bracket design

Figure 8: Large ton GEV panel design

Figure 9: Plastic drain pan

Figure 10: Reciprocating compressor

12

WSHP-PRC003-EN

Page 11 Page 13
Image 12
Page 11 Page 13
Contents WSHP-PRC003-EN Introduction Contents Digits 1-3 Unit Configuration Model NumberGeneral Data Table G1 General Data GEH 006 toTable G2 General Data GEH 024 to Table G3 General Data GEH 060 toTable G4 General Data GEV 006 to Table G5 General Data GEV 024 toTable G6 General Data GEV 048 to 024 030 036 040 042Table G7 General Data GEV 072 to Table G8 General Data GEH072 090 120 150 180 240Air-to-Refrigerant Coils Table G9 GEH/GEVTable G17 GEH/GEV 060 2-compr. circuit Features and Benefits Design AdvantagesGEH 1/2 to 5-Ton Cabinet GEV 1/2 to 5-Ton CabinetFeatures Benefits GEH/GEV 6 to 20-Ton CabinetAirflow Options 1/2 to 5 ton Airflow Options 6 to 20-tonAccess Panels 12-1/2 to 20-ton Hanging Device 1/2 to 5-tonHanging Device 6 to 12-1/2-ton Drain PanSchrader Connections 1/2 to 5-ton Co-axial Water-to-Refrigerant CoilCompressor and Co-axial Coil Isolation 1/2 to 5 ton Water Connections 1/2 to 5-tonBlower Housing Blower Motor 1/2 to 5 tonBlower Motor 6 to 20 ton Air-Side FilterBoilerless Control/Electric Heat option Waterside Economizer optionHot Gas Reheat option Common Reheat ApplicationsProper Hot Gas Design Controls Controls by TraneSafety Devices Basic ControlsBasic 24 Volt Controls Stand-alone SystemDeluxe Controls Deluxe 24V Electronic ControlsSmall Building Control Deluxe 24V features include Random Start Anti-short Cycle TimerCompressor Disable Safety ControlZN510 & ZN524 Controls Tracer ZN510 & ZN524 ControlsDirect Digital Controls Entering Water Temperature Sampling Waterside EconomizerWater Isolation Valves Tracer ZN controller system installation Building Control AdvantagesApplication Considerations Hanging the HorizontalHanging Devices and Duct Attachments Condensate trap installation Condensate TrapsDistributed Pumping System 40 F/ 4 C may require antifreeze in the water loopInstallation Made Easy Service Access

Model 180 GEV, 120 GEH, Model 012 GEH specifications

Trane, a leading name in HVAC (heating, ventilation, and air conditioning) systems, offers a diverse range of models designed to cater to different cooling needs. Among its notable products are the Trane Model 180 GEV, Model 120 GEH, and Model 012 GEH. Each of these units incorporates advanced technologies and features aimed at enhancing efficiency, durability, and overall performance.

The Trane Model 180 GEV is engineered for high-performance cooling and heating applications. One of its standout features is the variable-speed compressor, which allows for precise temperature control and significant energy savings. This model also integrates advanced inverter technology that optimizes energy consumption based on the load. The robust design of the unit ensures reliability even under extreme weather conditions, making it a favored choice for commercial and industrial sectors.

In contrast, the Trane Model 120 GEH is a versatile solution that focuses on efficiency and adaptability. This model is equipped with Trane’s exclusive Climatuff compressor technology, which enhances the reliability and longevity of the system. The Model 120 GEH also includes a user-friendly touchscreen interface, allowing for convenient adjustments and monitoring of the system's performance. Enhanced filtration systems contribute to improved indoor air quality, which is a critical factor for many users.

The Trane Model 012 GEH is designed for smaller spaces but does not compromise on performance. This compact unit boasts energy-efficient operation and is equipped with Trane’s proprietary Air-Cooled Scroll Compressors that enhance its cooling capacity while maintaining low operational noise levels. Its sleek design allows for easy installation in various settings, including residential areas. The Model 012 GEH also features enhanced reliability through its robust materials, ensuring that it can withstand varying environmental conditions.

All three models emphasize Trane’s commitment to sustainability and energy efficiency. With the incorporation of eco-friendly refrigerants and advanced heat exchange technologies, users can enjoy superior cooling performance while minimizing their environmental impact. Moreover, these models are backed by Trane’s comprehensive support, providing customers with peace of mind through warranties and service options.

In summary, Trane's Model 180 GEV, Model 120 GEH, and Model 012 GEH are exemplars of modern HVAC technology, offering various features tailored to meet specific cooling and heating requirements. Each model stands out for its unique capabilities, efficient operation, and robust design, reaffirming Trane's position as a trusted leader in the HVAC industry.
Top Page Image Contents