Trane 120 GEH, Model 180 GEV, Model 012 GEH manual Installation Made Easy, Service Access

Page 28

R

Application Considerations

Installation Made Easy

Installing a horizontal unit inside a cor- ridor to enhance sound attenuation pro- vides value to duct design. Trane takes this fact one step further.

The new GEH design offers same side return-air/supply-air access to the unit. This access is contained within the overall dimension of the units length as shown in Figure 32. The duct access to the unit allows the unit to be installed closely against a corridor wall, while at the same time eliminating space required for the duct design.

Most horizontal unit designs provide an opposite supply air from the return air arrangement, or an end supply arrange- ment option. See Figure 33 for end-sup- ply example. An end-supply design increases the overall unit length of the system to accommodate a 90-degree duct turn. This not only requires added space, but also adds cost in both mate- rials and installation.

Additional value to the design is acquired through the same side sup- ply/return-air design. This design elimi- nates a requirement for a four sided service access. When installing the

same side return/supply-air access, a brief 3-inch minimum is all that is required between the unit and the wall.

Service Access

To add more value in installation requirements, the same side supply/return design eliminates the need for a four-sided service access (See Figure 34). When installing the same side return/supply access, a small 3” / 76 mm minimum space is required between the unit and wall.

Figure 32: Same side supply/return air and end supply arrangements with ductwork.

Figure 33: Service access requirments.

28

WSHP-PRC003-EN

Page 27 Page 28
Image 28
Page 27 Page 28
Contents WSHP-PRC003-EN Introduction Contents Digits 1-3 Unit Configuration Model NumberGeneral Data Table G1 General Data GEH 006 toTable G2 General Data GEH 024 to Table G3 General Data GEH 060 toTable G4 General Data GEV 006 to Table G5 General Data GEV 024 toTable G6 General Data GEV 048 to 024 030 036 040 042Table G7 General Data GEV 072 to Table G8 General Data GEH072 090 120 150 180 240Air-to-Refrigerant Coils Table G9 GEH/GEVTable G17 GEH/GEV 060 2-compr. circuit Features and Benefits Design AdvantagesGEH 1/2 to 5-Ton Cabinet GEV 1/2 to 5-Ton CabinetFeatures Benefits GEH/GEV 6 to 20-Ton CabinetAirflow Options 1/2 to 5 ton Airflow Options 6 to 20-tonAccess Panels 12-1/2 to 20-ton Hanging Device 1/2 to 5-tonHanging Device 6 to 12-1/2-ton Drain PanSchrader Connections 1/2 to 5-ton Co-axial Water-to-Refrigerant CoilCompressor and Co-axial Coil Isolation 1/2 to 5 ton Water Connections 1/2 to 5-tonBlower Housing Blower Motor 1/2 to 5 tonBlower Motor 6 to 20 ton Air-Side FilterBoilerless Control/Electric Heat option Waterside Economizer optionCommon Reheat Applications Hot Gas Reheat optionProper Hot Gas Design Controls Controls by TraneSafety Devices Basic ControlsBasic 24 Volt Controls Stand-alone SystemDeluxe 24V Electronic Controls Deluxe ControlsSmall Building Control Deluxe 24V features include Random Start Anti-short Cycle TimerCompressor Disable Safety ControlZN510 & ZN524 Controls Tracer ZN510 & ZN524 ControlsDirect Digital Controls Waterside Economizer Entering Water Temperature SamplingWater Isolation Valves Tracer ZN controller system installation Building Control AdvantagesHanging the Horizontal Application ConsiderationsHanging Devices and Duct Attachments Condensate trap installation Condensate TrapsDistributed Pumping System 40 F/ 4 C may require antifreeze in the water loopInstallation Made Easy Service Access

Model 180 GEV, 120 GEH, Model 012 GEH specifications

Trane, a leading name in HVAC (heating, ventilation, and air conditioning) systems, offers a diverse range of models designed to cater to different cooling needs. Among its notable products are the Trane Model 180 GEV, Model 120 GEH, and Model 012 GEH. Each of these units incorporates advanced technologies and features aimed at enhancing efficiency, durability, and overall performance.

The Trane Model 180 GEV is engineered for high-performance cooling and heating applications. One of its standout features is the variable-speed compressor, which allows for precise temperature control and significant energy savings. This model also integrates advanced inverter technology that optimizes energy consumption based on the load. The robust design of the unit ensures reliability even under extreme weather conditions, making it a favored choice for commercial and industrial sectors.

In contrast, the Trane Model 120 GEH is a versatile solution that focuses on efficiency and adaptability. This model is equipped with Trane’s exclusive Climatuff compressor technology, which enhances the reliability and longevity of the system. The Model 120 GEH also includes a user-friendly touchscreen interface, allowing for convenient adjustments and monitoring of the system's performance. Enhanced filtration systems contribute to improved indoor air quality, which is a critical factor for many users.

The Trane Model 012 GEH is designed for smaller spaces but does not compromise on performance. This compact unit boasts energy-efficient operation and is equipped with Trane’s proprietary Air-Cooled Scroll Compressors that enhance its cooling capacity while maintaining low operational noise levels. Its sleek design allows for easy installation in various settings, including residential areas. The Model 012 GEH also features enhanced reliability through its robust materials, ensuring that it can withstand varying environmental conditions.

All three models emphasize Trane’s commitment to sustainability and energy efficiency. With the incorporation of eco-friendly refrigerants and advanced heat exchange technologies, users can enjoy superior cooling performance while minimizing their environmental impact. Moreover, these models are backed by Trane’s comprehensive support, providing customers with peace of mind through warranties and service options.

In summary, Trane's Model 180 GEV, Model 120 GEH, and Model 012 GEH are exemplars of modern HVAC technology, offering various features tailored to meet specific cooling and heating requirements. Each model stands out for its unique capabilities, efficient operation, and robust design, reaffirming Trane's position as a trusted leader in the HVAC industry.
Top Page Image Contents