Distributed Pumping System

Application

Considerations

A distributed pumping system contains either a single or dual pump module, specifically sized for each water-source heat pump, then connected directly to the units supply and return lines.

The distributed system’s supply and return lines should be sized to handle the required flow with a minimum pres- sure drop.

1. Hose kits are used to connect the

water supply and return line to the

water inlets and outlets. Trane offers

various hose kit combinations to

sized to handle the required flow with a minimum pressure drop.

Note: Pipe will sweat if low tempera- ture water is below the dew point of the surrounding space. Trane recommends that these lines be insulated to prevent damage from condensation when con- denser loop is designed to be below 60 F/ 16 C. Equipment installed in attic/crawl space temperatures below

40 F/ 4 C may require antifreeze in the water loop.

7.For acoustically sensitive areas, a six- inch deep fiberglass insulation is recommended to be field installed below the horizontal unit. This field supplied insulation should be approximately twice the footprint size of the unit. It provides sound damping of the unit while in operation.

better facilitate system flow balanc-

ing. These flexible hoses also aid in

the reduction of vibration between

the unit and the rigid central piping

system.

2.The unit’s (item 2) 3/4-inch high

3.voltage and (item 3) 1/2-inch low voltage connections are located on the left chamfered corner of the unit. They are designed to accept conduit.

4.A field supplied line voltage disconnect should be installed for branch circuit protection. Check local codes for requirements.

5.Trane’s self-contained pump module and hose kit make a complete pump- ing package for distributed pumping systems. The module is designed for circulating commercial loops that require a maximum flow rate of

20 gpm (76 lpm). Each pump module is fully assembled for connection to water and electrical points. The kit contains all of the necessary components for the installation, operation and maintenance of a closed loop application.

See WSHPC-IN-5 (72-9006-03) for electrical and dimensional require- ments

6.The distributed pumping system supply and return lines should be

Figure 32: Distributed pumping system installation.

WSHP-PRC003-EN

Model 180 GEV, 120 GEH, Model 012 GEH specifications

Trane, a leading name in HVAC (heating, ventilation, and air conditioning) systems, offers a diverse range of models designed to cater to different cooling needs. Among its notable products are the Trane Model 180 GEV, Model 120 GEH, and Model 012 GEH. Each of these units incorporates advanced technologies and features aimed at enhancing efficiency, durability, and overall performance.

The Trane Model 180 GEV is engineered for high-performance cooling and heating applications. One of its standout features is the variable-speed compressor, which allows for precise temperature control and significant energy savings. This model also integrates advanced inverter technology that optimizes energy consumption based on the load. The robust design of the unit ensures reliability even under extreme weather conditions, making it a favored choice for commercial and industrial sectors.

In contrast, the Trane Model 120 GEH is a versatile solution that focuses on efficiency and adaptability. This model is equipped with Trane’s exclusive Climatuff compressor technology, which enhances the reliability and longevity of the system. The Model 120 GEH also includes a user-friendly touchscreen interface, allowing for convenient adjustments and monitoring of the system's performance. Enhanced filtration systems contribute to improved indoor air quality, which is a critical factor for many users.

The Trane Model 012 GEH is designed for smaller spaces but does not compromise on performance. This compact unit boasts energy-efficient operation and is equipped with Trane’s proprietary Air-Cooled Scroll Compressors that enhance its cooling capacity while maintaining low operational noise levels. Its sleek design allows for easy installation in various settings, including residential areas. The Model 012 GEH also features enhanced reliability through its robust materials, ensuring that it can withstand varying environmental conditions.

All three models emphasize Trane’s commitment to sustainability and energy efficiency. With the incorporation of eco-friendly refrigerants and advanced heat exchange technologies, users can enjoy superior cooling performance while minimizing their environmental impact. Moreover, these models are backed by Trane’s comprehensive support, providing customers with peace of mind through warranties and service options.

In summary, Trane's Model 180 GEV, Model 120 GEH, and Model 012 GEH are exemplars of modern HVAC technology, offering various features tailored to meet specific cooling and heating requirements. Each model stands out for its unique capabilities, efficient operation, and robust design, reaffirming Trane's position as a trusted leader in the HVAC industry.