Honeywell F90A, F90B specifications Installing the Wash LED

Page 8

F90A,B SELF-CONTAINED COMMERCIAL ELECTRONIC AIR CLEANER

1.LOCATE WASH LED CUTOUT BEHIND SWITCH COVER ASSEMBLY STICKER.

3. PUSH LED LENS INTO PLACE.

2.USE A KNIFE TO CUT A HOLE IN THE STICKER.

INSERT LED INTO LENS FROM BACK

4. OF THE SWITCH COVER ASSEMBLY.

5.ATTACH NEW STICKER TO SWITCH COVER ASSEMBLY.

6. REINSTALL SWITCH COVER ASSEMBLY

SCREWS.M6832

Fig. 6. Installing the WASH LED.

68-0103-6 Revised 11-07

8

Image 8

Contents Features Application ContentsSpecifications Ordering InformationPlanning the Installation Application and OperationDetermine Number of F90 Needed Choose LocationOutdoor Air Example 1. Sizing by Air Changes per Hour and Room VolumeSolution Installation When Installing this Product…Example 3. Sizing by Air Changes per Hour and Room Volume Example 2. Sizing by Occupant LoadMounting the F90 Using Lag Screws UnpackingMounting F90 can be mounted in any of four waysInstalling the Wash LED Mounting the F90 Using Threaded Steel Rod Using the mounting template to locate holesArrange two 2 x 4 supports as shown in Fig Mount the steel rods to the supportsWiring Power CordInstalling Activated Carbon Filters, Cells, and Prefilters Permanent WiringCheckout AdjustmentsService Cleaning the F90 Cleaning the PrefilterCleaning the Cell Using Alkaline Base Detergent Hazardous Chemical Can cause personal injuryDiscolored Aluminum Removing Specific Contaminants from the CellReplacing Ionizer Wires Modifying to Reduce Ozone OdorElectrical Troubleshooting Troubleshooting ProcedureRemoving The Power Box Tools And EquipmentStart Removing the F90 Power Box Assembly F90A 120 Vac model schematic diagram F90A 230 Vac model schematic diagram CE compliant model F90B 120 Vac model schematic diagram Replacement Parts LIST/EXPLODED View Parts and Optional Accessories Not IllustratedF90A exploded view. Part numbers are keyed to Parts List Limited ONE-YEAR Warranty How to make a warranty claim or have questions answered