Honeywell Galaxy 2 manual Setting with Faults, Cancelling System Setting, Unsetting

Page 10

Setting with Faults

Normally, if there is a fault of any kind on the system, setting will not be permitted until the fault is rectified. However, depending on the set-up of your system and the level of your user access, it may be possible override a fault and proceed with the setting procedure.

If there are faults present when you try to set via the keypad, the following typical display will be shown:

Fault Override

03 Event(s)>

Use the cursor keys to scroll through the faults. If you are able to override them, the bottom row will show the message ENT to continue>.

AC Fail

ENT to Continue

Pressing the ent key at this point will override the fault for one set period only and allow the system to set. If there is more than one fault, this process is repeated for each fault.

Cancelling System Setting

The Full, Part and Night setting routines can be cancelled, before the system sets, by pressing the esc key on the keypad used to begin the setting routine. To cancel the setting routine on another keypad, type in your user PIN code and press A> or ent.

Unsetting

To unset the system, enter the protected area by the agreed route. A timed entry period will begin and a pulsed tone will sound.

Keypad:

5804 Keyfob :

KTC805 Keyfob :

Prox Tag:

Type your user code

Press the [OFF] button.

Press button 2.

Hold the tag in front

then press [ent]*.

 

 

of the prox symbol.

 

 

 

* NOTE: Unsetting using a keypad may not be possible on DD243 compliant systems.

6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Galaxy 2 Series Page Table of Contents Iii Page Introduction Users Controlling Your Alarm SystemGroups Keypads Prox Tags/CardsWireless Keyfobs Setting the System Full Set060 Open Zone 1044 Setting the System Part or Night Set030 Unsetting Setting with FaultsCancelling System Setting Fault Override EventsHow to Restore an Alarm Cancelling an AlarmAlert Conditions Setting and Unsetting With Group Choice Setting and Unsetting GroupsSetting and Unsetting Without Group Choice Hot Keys10 = Setting ent to Select Menu Access10 = Setting 20 = Display 30 = Test 40 = Modify Menu 13 Part Set Menu 11 Omit ZonesMenu 12 Timed Set Menu 14 Night SetMenu 23 Display Version 0951 01/08/04 1021+ IntruderMenu 22 View Log Menu 24 PrintMenu 41 Time/Date Menu 31 Walk TestMenu 32 Output Test Menu 42 Editing UsersUser 1 *1234 UserL2 = MasterMenu 48 Level 3 Access Menu 47 Remote AccessMenu 44 Mobile Numbers Installer Details Zone Reference TableIU1-0032 Rev

Galaxy 2 specifications

The Honeywell Galaxy 2 is a sophisticated intruder alarm control panel renowned for its versatility and advanced security features. This advanced system is designed to provide comprehensive protection for residential and commercial premises, ensuring peace of mind for users.

At the heart of the Galaxy 2 is its highly flexible architecture, which allows users to customize the system according to their specific security needs. The control panel supports multiple zones, enabling the installation of numerous sensors and detectors across large areas. This feature allows for effective monitoring and protection in various environments, making it ideal for both homes and businesses.

One of the standout characteristics of the Honeywell Galaxy 2 is its user-friendly interface. The control panel is equipped with an intuitive keypad and an LCD display, allowing users to navigate through different functions easily. This user-centric design ensures that individuals, regardless of their technical skill level, can operate the system without frustration.

In terms of communication technologies, the Galaxy 2 comes with advanced options for connectivity. It supports both wired and wireless connections, which adds to its flexibility during installation. The system can integrate seamlessly with a range of sensors, including motion detectors, door contacts, and glass break detectors, enhancing the overall security capability.

The Galaxy 2 system also includes powerful remote monitoring capabilities. Users can manage and monitor their security system via mobile devices, allowing for real-time alerts and control from virtually anywhere. This functionality not only provides convenience but also enhances the security response time.

Another essential feature of the Honeywell Galaxy 2 is its built-in event logging capability. This feature allows users to review a comprehensive log of system events, such as alarm activations and system status changes, helping in analyzing security incidents and improving response strategies.

Additionally, the Galaxy 2 is designed with scalability in mind. As security needs evolve, the system can be easily expanded with additional zones or connected devices, ensuring that users have ongoing protection without the need for a complete system overhaul.

In summary, the Honeywell Galaxy 2 is a robust and adaptable security solution equipped with advanced technologies, a user-friendly interface, and extensive features that cater to diverse security requirements. Its combination of flexibility, remote management, and scalability makes it a trusted choice for safeguarding properties effectively.
Top Page Image Contents