LocationRequirements, Electrical Requirements

Parts needed

■If metal casement window installation, a ³⁄₄" (19 mm) wood filler panel will be needed for opening greater than 15¹⁄₂" (39.4 cm) wide. See “Metal or Wood Casement Window Installation.”

■If wood casement window installation, a 1" (2.5 cm) wood frame will be needed. See “Metal or Wood Casement Window Installation.”

NOTE: The installation of this air conditioner is intended to be permanent. When installed in an apartment or rental property, permission to make modifications should be obtained from owner or landlord of building prior to installation of air conditioner.

LocationRequirements

IMPORTANT: Observe all governing codes and ordinances.

Check the location where the air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.

The location should provide:

■A horizontal sliding or casement type window with a minimum width of 15¹⁄₂" (39.4 cm).

■Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.

NOTE: Do not use an extension cord.

■Free movement of air in room to be cooled.

■Adequate window frame assembly and side of structure support for weight of air conditioner. Air conditioner weighs approximately 82 lbs (37.2 kg) to 100 lbs (45 kg).

NOTE: Do not install the air conditioner in an area where the front panel will be exposed to heat sources that will raise the panel surface temperature above 120°F (50°C).

Window Installation

Window opening measurements:

■15¹⁄₂" (39.4 cm) minimum opening width

■22" (55.9 cm) minimum opening height

A. 15¹⁄₂" (39.4 cm) minimum

B. 22" (55.9 cm) minimum

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

The electrical ratings for your air conditioner are listed on the model and serial number label. The model and serial number label is located on the right-hand side of the cabinet.

Specific electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the power supply cord.

Power supply cord

Wiring requirements

■ 115 volt (103.5 min. - 126.5 max.)

■ 0-12 amps

■ 15-amp time-delay fuse or circuit breaker

■ Use on single outlet circuit only.

Recommended ground method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical installer.

It is the customer's responsibility:

■To contact a qualified electrical installer.

■To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

ACS088PR0 specifications

The Whirlpool ACS088PR0 is an advanced air conditioning unit designed to provide efficient cooling solutions for residential and commercial spaces. With a focus on performance and comfort, this model incorporates several key features and technologies that make it a standout choice in the marketplace.

One of the main features of the ACS088PR0 is its powerful cooling capacity, which is ideal for spaces of varying sizes. This unit is capable of quickly lowering indoor temperatures even during the hottest days, ensuring optimal comfort for users. Additionally, it employs a variable-speed compressor that not only enhances cooling efficiency but also helps in reducing energy consumption. As a result, this air conditioner is designed to deliver significant savings on electricity bills while maintaining a comfortable living environment.

The ACS088PR0 also integrates advanced smart technology, allowing users to control the unit remotely via a smartphone app. This feature provides convenience, enabling users to adjust settings, monitor energy usage, and receive maintenance reminders from anywhere. The smart connectivity enhances user experience and ensures that the air conditioner can be optimized according to individual preferences and schedules.

Another notable characteristic of the Whirlpool ACS088PR0 is its quiet operation. The unit is designed to minimize noise levels, making it suitable for bedrooms, offices, and other quiet environments. The sound-dampening design, along with high-quality components, ensures that users can enjoy comfortable cooling without disruptive noise.

The air conditioner also features a multi-stage air filtration system that helps in improving indoor air quality. The integrated filters effectively capture dust, allergens, and other airborne particles, leading to a healthier living space. The filters are easily accessible, making routine maintenance simple for users who prioritize cleanliness and air quality.

In terms of durability, the ACS088PR0 is built with high-quality materials that ensure long-lasting performance. Its rugged construction and efficient design make it suitable for various climates and conditions.

With a combination of advanced features, smart technology, and robust design, the Whirlpool ACS088PR0 stands out as an excellent choice for those seeking a reliable and efficient air conditioning solution. Whether for residential or commercial use, this unit delivers on performance, comfort, and energy efficiency.