Whirlpool ACS088PR0 manual AIR Conditioner USE, StartingYourAirConditioner, Display Symbols, Mode

Page 9

AIR CONDITIONER USE

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

Do not try to operate your air conditioner in the cooling mode when outside temperature is below 66°F (19°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.

NOTES:

In the event of a power failure, your air conditioner will automatically turn back on.

If the electronic control will not respond to touch pad or remote control commands, it is necessary to unplug the air conditioner from the electrical outlet for 5 seconds before plugging back in.

StartingYourAirConditioner

NOTE: If the room temperature is below 55ºF (13ºC), the display will show 55ºF (13ºC). If the room temperature is above 99ºF (37ºC), the display will show 99ºF (37ºC).

Display Symbols

1.

Remove clear protective film from control panel and front

 

panel badge.

2.

Set air exchanger. See “Air Exchanger.”

3.

Press POWER to turn on air conditioner.

 

NOTE: When air conditioner is turned on for the first time

 

after it is plugged in, it will display the default settings: Cool

A B

E F

A. Cool mode indicator light

B. Fan only mode indicator light C. Power Saver indicator light D. Timer indicator light

C D

GH

E.Auto fan mode indicator light

F.Low fan mode indicator light

G.High fan mode indicator light

H.Turbo fan mode indicator light

 

mode, Turbo fan speed, 72°F (22°C) for 3 seconds. When it is

 

turned on at all other times, it will display the previous

 

settings for 3 seconds, and then display the room

 

temperature.

4.

Choose mode. See “Mode.”

5.

Choose fan speed. See “Fan Speed.”

6.

Choose temperature. See “Temperature.”

Air Exchanger

Set the Air Exchanger control to CLOSED for maximum continuous cooling. The Air Exchanger set to OPEN circulates fresh air and draws stale or smoky air from the room.

Open—to exhaust room air to the outside

Closed—maximum air circulation and cooling

Mode

1.Press MODE until you see the indicator light come on for the setting you desire.

2.Choose Cool, Fan Only or Power Saver.

Cool—Cools room. Press FAN SPEED to choose fan speed. Then adjust the temperature by pressing the plus or minus buttons.

Fan Only—Only the fan runs. You can select the fan speed by pressing FAN SPEED, but you cannot adjust the Temperature control setting. Display shows the current room temperature.

Power Saver—Fan runs only when cooling is needed. You can select the fan speed by pressing FAN SPEED.

Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.

9

Image 9
Contents 1188176 Room AIR Conditioners for SliderTable of Contents ÍndiceTable DES Matières Installation Requirements AIR Conditioner SafetyToolsandParts Tools neededLocationRequirements Window InstallationElectrical Requirements Parts neededMetalorWoodSlidingWindow Installation Installation InstructionsPower Supply Cord UnpacktheAir ConditionerSee Complete Installation Install support platform Install air conditioner in windowWood Casement Window Installation Metal Casement Window InstallationInstall Support Platform Closed or stationary windowCompleteInstallation AIR Conditioner USE Display SymbolsStartingYourAirConditioner Air ExchangerTo change the temperature display from F to C TemperatureTimer Delay To select the mode or Power SaverTo lower the temperature To raise the temperatureChangingAirDirection NormalSoundsCleaningtheIntakeGrille CleaningtheAirFilterAIR Conditioner Care PaintDamageRepairTroubleshooting Assistance or Service TheU.S.AInCanada ONE Year Full Warranty Whirlpool AIR Conditioner WarrantySu seguridad y la seguridad de los demás es muy importante Seguridad DEL Acondicionador DE AireRequisitos DE Instalación HerramientasypiezasRequisitos deubicación Método recomendado para la puesta a tierra Requisitos eléctricosCable de suministro de energía Nota Su aparato puede ser diferente del que se ilustraDesempaqueelacondicionadorde aire Instrucciones DE InstalaciónInstalación de la plataforma de soporte NotasInstale el acondicionador de aire en la ventana InstalaciónenventanaabisagrademetalomaderaInstalación en ventanas a bisagra de metal Ventana cerrada o fijaInstalación en ventanas a bisagra de madera Marco de ventana abiertaQuite el mecanismo de traba y las manijas Pinte del color deseadoCompletelainstalación Cómo Usar SU Acondicionador DE Aire Mode ModoCómoponeren marcha suacondicionadorde aire Air Exchanger Renovador de aireFan Speed Velocidad de ventilación TemperaturaPara cambiar la pantalla de la temperatura de F a C Para seleccionar el modo o ahorro de energía Para encender o apagar el acondicionador de airePara subir la temperatura Para bajar la temperaturaCómo Cuidar SU Acondicionador DE Aire Solución DE Problemas Su acondicionador de aire no funcionaParece que el acondicionador de aire funciona excesivamente En losEE.UU Ayuda O Servicio TécnicoGarantía Total DE UN AÑO Garantía DEL Acondicionador DE Aire DE WhirlpoolVotre sécurité et celle des autres est très importante Sécurité DU ClimatiseurExigences D’INSTALLATION Exigences d’emplacementOutils etpièces Méthode recommandée de liaison à la terre SpécificationsélectriquesCordon dalimentation Installation de la plaque de soutien Instructions DinstallationDéballageduclimatiseur Ou enboisVoir Pour compléter l’installation Installationdansunefenêtreàbattantsenmétal ou En boisPositionnement du climatiseur dans la fenêtre Montage dans une fenêtre à battants en métalCadre de fenêtre ouvert Montage dans une fenêtre à battants en boisSi l’ouverture de la fenêtre est supérieure à 15¹⁄₂ 39,4 cm Pourcompléterl’installation Utilisation DU Climatiseur Symboles daffichageMiseenmarchedu climatiseur Air Exchanger échangeur d’airAppuyer sur TIMER. Lindicateur lumineux restera allumé Pour faire fonctionner le climatiseur avec la télécommandeFan Speed Vitesse de ventilateur TempératureChangementdedirectiondelair Pour sélectionner le mode ou Power Saver économie dénergiePour mettre en marche et arrêter le climatiseur Pour augmenter la températureSonsnormaux Entretien DU ClimatiseurNettoyagedu filtreàair Nettoyagedelagrilled’entréed’airDépannage Le climatiseur ne fonctionne pasLe climatiseur semble se mettre en marche trop fréquemment Au Canada Assistance OU ServiceGarantie Complète DE UN AN Garantie DU Climatiseur Whirlpool1188176

ACS088PR0 specifications

The Whirlpool ACS088PR0 is an advanced air conditioning unit designed to provide efficient cooling solutions for residential and commercial spaces. With a focus on performance and comfort, this model incorporates several key features and technologies that make it a standout choice in the marketplace.

One of the main features of the ACS088PR0 is its powerful cooling capacity, which is ideal for spaces of varying sizes. This unit is capable of quickly lowering indoor temperatures even during the hottest days, ensuring optimal comfort for users. Additionally, it employs a variable-speed compressor that not only enhances cooling efficiency but also helps in reducing energy consumption. As a result, this air conditioner is designed to deliver significant savings on electricity bills while maintaining a comfortable living environment.

The ACS088PR0 also integrates advanced smart technology, allowing users to control the unit remotely via a smartphone app. This feature provides convenience, enabling users to adjust settings, monitor energy usage, and receive maintenance reminders from anywhere. The smart connectivity enhances user experience and ensures that the air conditioner can be optimized according to individual preferences and schedules.

Another notable characteristic of the Whirlpool ACS088PR0 is its quiet operation. The unit is designed to minimize noise levels, making it suitable for bedrooms, offices, and other quiet environments. The sound-dampening design, along with high-quality components, ensures that users can enjoy comfortable cooling without disruptive noise.

The air conditioner also features a multi-stage air filtration system that helps in improving indoor air quality. The integrated filters effectively capture dust, allergens, and other airborne particles, leading to a healthier living space. The filters are easily accessible, making routine maintenance simple for users who prioritize cleanliness and air quality.

In terms of durability, the ACS088PR0 is built with high-quality materials that ensure long-lasting performance. Its rugged construction and efficient design make it suitable for various climates and conditions.

With a combination of advanced features, smart technology, and robust design, the Whirlpool ACS088PR0 stands out as an excellent choice for those seeking a reliable and efficient air conditioning solution. Whether for residential or commercial use, this unit delivers on performance, comfort, and energy efficiency.