Axis Communications P1343-E Network, Basic TCP/IP Settings, IPv4 Address Configuration, ARP/Ping

Page 42

AXIS P1343-E Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 43.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 43.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server, which when allows you to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 49) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Axis P1343-E Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsTable of Contents Axis P1343-E Network CameraTechnical Specifications Hardware overview Hardware overviewAxis P1343-E Network Camera Connectors Function Pin Specifications GNDMaintenance LED indicatorsStatus LED when using Focus Assistant Replacing the lensAttach and screw on the new lens Accessing the product Accessing the productAccess from a browser Network TCP/IP Advanced Access from the InternetSet the root password Click Create self-signed certificateLive View Controls on the Live ViewAxis Media Control viewer toolbar PTZ ControlsAMC Audio controls Axis P1343-E Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Accessing audio streams Setting up the product Setting up the productBasic Setup Video Stream Video and AudioVideo and Audio Pixel CounterStream Profiles Image264 Image Appearance Camera SettingsExposure Settings White balanceView Area OverlayFocus Audio SettingsPrivacy Mask Audio ChannelsAudio Input G711 G726Audio Clips Audio OutputDefault viewer for browsers Live View ConfigLive View Config Output Buttons Viewer SettingsUser Defined Links Browser Viewer DescriptionPTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced ControlsCamera Tampering DetectorsDetectors Motion DetectionSet up motion detection Motion detection parametersRecommended values Default valuesAudio detection Go to Detectors Audio DetectionApplications ApplicationsEvents Setting Up an Action RuleEvents Convert Event Types to Action RulesRecipients SchedulesRecurrences Axis P1343-E Network Camera Recording List RecordingsRecordings Continuous recordingAxis P1343-E Network Camera Security System OptionsSystem Options UsersDate & Time IeeeAudio Support IPv4 Address Configuration Basic TCP/IP SettingsNetwork IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourNetwork Share MaintenancePorts & Devices PortsSystem Overview SupportSupport Overview Logs & ReportsFile Upload Reset to factory default settingsScripting Plain ConfigAxis P1343-E Network Camera Emergency recovery procedure TroubleshootingTroubleshooting Checking the firmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Problems uploading files Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Technical SpecificationsConnectors Maintenance Installation aidsMemory Power Network SecurityPerformance considerations M1.8
Related manuals
Manual 142 pages 36.45 Kb
Top Page Image Contents