AXIS P1343-E Network Camera
Hardware overview
15.Bracket screws (4x)
16.Bracket adapter
17.Network cable (route through wall bracket)
18.Wall bracket
19.Bracket adjustment screw
Connectors
Network connector -
Caution
To protect the product against power surges, a shielded network cable (STP) must be used between the product and the network switch. Ensure that the network switch is properly grounded.
Audio in (pink) - 3.5 mm input for a mono microphone, or a
Audio out (green) - 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active speaker with a
SD card slot - A standard or
Note
Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to Setup > System Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
•Enabling the Focus Assistant. Press and very quickly release the Control button.
•Connecting to an AXIS Video Hosting System service. See page 43. To connect, press and hold the button for about 1 second until the Status LED flashes green.
•Connecting to AXIS Internet Dynamic DNS Service. See page 43. To connect, press and hold the button for about 3 seconds.
•Resetting the product to factory default settings. See page 49.
Power connector -
I/O connector |
|
|
| DC power input | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note
For technical specifications, see page 56.
7