CC880/LP880, SC8016 Operators Guide 28.0 | PET Pager Reporting |
|
|
EN 19
28.0 PET Pager Reporting
The system can be configured by your security company to report to a pocket pager when an alarm and/or any system event occurs. When using either of these two reporting formats, easy to understand text messages are received so that the appropriate action can be taken.
Table 17 lists all the events that can be reported in PET pager formats.
Table 17: PET Pager Messages
Event At Control Panel | PET Message |
AC Fail | AC Fail |
AC Restore | AC Restore |
Area Has Been Armed | Close Area #, User # |
Area Has Been Disarmed | Open Area #, User # |
Burglary Zone Has Triggered | Alarm Zone # |
Burglary Zone Has Restored | Restore Zone # |
Burglary Zone Triggered, Area # | Alarm Zone #, Area # |
Burglary Zone Restored, Area # | Restore Zone #, Area # |
Access Denied – Codepad Tamper | Codepad Tamper |
Data Programming Change | Data Change |
System Is Armed | Close User # |
System Is Disarmed | Open User # |
Codepad Duress | Duress, Open User # |
Low Battery | Low Battery |
Low Battery Restore | Battery Restore |
Codepad Panic Alarm | Panic |
Codepad Fire Alarm (V1.37+) | Fire |
Codepad Medical Alarm (V1.37+) | Medical |
Test Report | Test |
Zone Automatically Isolated When | Bypass Zone # |
Armed |
|
Disarming When Zone Has Been | Bypass Restore Zone # |
Isolated |
|
Zone Unsealed At End Of Exit Time | Trouble Zone # |
Zone Has Restored After Exit Time | Trouble Restore # |
24 Hour Zone Triggered | 24 Hour Alarm # |
24 Hour Zone Restored | 24 Hour Restore # |
24 Hour Fire Zone Triggered | Fire Zone # |
24 Hour Fire Zone Restored | Fire Restore # |
The # symbol represents the zone or area number in the transmission.
The following example shows how a single transmission is received on the PET pager. A similar message to the one below is seen when the control panel is armed by User 1.
Table 18: Example of a Single Transmission
1111 | CLOSE USER | 01 |
Subscriber ID Number | System Armed | User #1 |
The Subscriber ID number is a unique 4 digit number identifying which alarm system made the call. Only your security company can program the Subscriber ID number (Factory Default = 0000).
Bosch Security Systems 6/04 920036O.OG.162