CC880/LP880, SC8016 Operators Guide 3.0 | Codepad Indicators |
|
|
EN 6
Figure 3: CP5 Eight Zone LCD Codepad
Figure 4: Sixteen Zone LCD Codepad
The codepad is the communications interface between you and your alarm system. Use the codepad to issue commands. The codepad offers both visual and audible indications that guide you through the general operation.
The codepad incorporates numerous indicators. There are zone indicators that show the condition of each zone and four other indicators for general status. The following pages outline a list of situations and the relevant indicators that are seen.
3.1Zone Indicators
1 2 3 …. The zone indicators (1 to 8) display the
status of the zones. Table 2 lists the various circumstances under which the indicators display (such as, Zone Sealed/Zone Unsealed).
Table 2: Zone Indicator
Zone Indicator | Definition |
On | Zone is unsealed |
Off | Zone is sealed |
Flashing Fast | Zone is in alarm condition |
(0.25 sec. on/ |
|
0.25 sec. off) |
|
Flashing Slow | Zone is manually isolated or |
(1 sec. on/1 sec. off) | selected to be isolated |
3.2AWAY Indicator
| The AWAY indicator shows the system |
| is armed in AWAY Mode. The AWAY |
| indicator also flashes in unison with the |
| STAY indicator when programming |
| various options throughout the |
| Operator’s Manual. |
| See Section 4.2 Arming in AWAY Mode for |
| information on the different methods of |
| arming the system in AWAY Mode. |
|
|
Table 3: | AWAY Indicator |
|
|
|
|
AWAY | Definition |
Indicator |
|
On | System is armed in AWAY Mode. |
Off | System is not armed in AWAY Mode. |
3.3STAY Indicator
The STAY indicator displays that the system is armed in STAY Mode 1 or STAY Mode 2. The STAY indicator also flashes in unison with the AWAY indicator when programming various options throughout the Operator’s Manual. See Section 4.3 Arming in STAY Mode 1 for different methods of arming in STAY Mode 1. See Section 4.4 Arming in STAY Mode 2 to arm in STAY Mode 2.
Table 4: STAY Indicator
STAY | Definition |
Indicator |
|
On | System is armed in STAY Mode 1 |
| or STAY Mode 2. |
Off | System is not armed in STAY |
| Mode 1 or STAY Mode 2. |
Flashing twice | Zone isolating mode or setting |
a second | STAY Mode 2 zones. |
Flashing once | Day alarm status – day alarm |
every 3 sec. | turned on. |
Bosch Security Systems 6/04 920036O.OG.162