Bosch Appliances 8500, LTC instruction manual Alarm Relay Response

Page 53

Alarm Relay Response

15.7 Alarm Relay Response

Allegiant alarm responses include the ability to trigger isolated alarm relay outputs from an LTC 8540/00 Alarm Interface unit. An alarm output is typically used to activate the alarm input of a security Digital Video Recorder (DVR) or other alert- ing device. In this type of scenario, a DVR is programmed to change recording speeds from a slower rate to a faster rate upon alarm activation. Operation of the relay outputs from the LTC 8540 Alarm Interface unit depends on the system con- figuration for responding to alarm events. The alarm output relays behave according to the following conditions:

1.Relay 1 activates if the system uses the Basic alarm response mode and an alarm occurs on any system monitor. Relay 1 deactivates after all alarms have been removed from the inputs. Relay 1 also deactivates if the system (monitor or alarms) is disarmed by an operator via the keyboard. Pressing [Acknowledge] on the system keyboard does not deactivate Relay 1 since the alarm video fol- lows the contact applied to the unit in this alarm response mode. Other relays are not used in this mode.

2.Relay 1 activates if the base system is set to use the Sequence & Display alarm response mode and an alarm occurs on any system monitor. Relay 1 deactivates after all alarm videos have been acknowledged (by pressing the [Acknowledge] key) via system operator(s) from all system monitors. Relay 1 also deactivates if the system is disarmed (either the monitor or the alarm(s)) by an operator via the keyboard. Removal of the alarm input does not deactivate Relay 1 since the alarm video(s) are not dependent on duration of the contact applied to the unit in this alarm response mode. Other relays are not used in this mode.

3.If the base system uses the Autobuild alarm response mode and an alarm occurs on system monitors, the relay corresponding to the monitor number activates for the duration that the corresponding alarm input is applied to the unit. The relay deactivates if the monitor associated with the relay or if the alarm(s) being displayed on the monitor is disarmed by an operator via the keyboard. Pressing [Acknowledge] on the system keyboard does not deactivate the relays since the alarm video follows the contact applied to the unit in this alarm response mode.

4.If the Alarm Group table screen, in the PC- based LTC 8059/00 MCS package or the LTC 8850/00 GUI Software, contains an alarm group that includes mon- itors and the monitor option has been selected in the Relay Action column, the corresponding relay activates for the duration the alarm video remains on the monitor. The relay deactivates if the associated monitor (or the alarm(s) being displayed on the monitor) is disarmed by an operator via the keyboard. Pressing [Acknowledge] on the system keyboard does not deactivate the relay unless this feature has been selected for the associated alarm group. If the Monitor option has been set to 1 in the group table, only Relay 1 activates when monitors in that alarm group become alarmed.

EN 43

Page 52 Page 54
Image 53
Page 52 Page 54
Contents LTC 8500 Series BoschBosch Security Systems December 13 Important Safeguards For Rack-mount Product For Indoor ProductFor Outdoor Product Precauciones de Seguridad SécuritéSicherheitshinweise Sicurezza Veiligheidsmaatregelen Medidas de SegurançaPage Bosch Security Systems December 13 Page Bosch Security Systems December 13 Qty Parts ListUnpacking USA ServiceDescription Bosch Security Systems December 13 Allegiant Feature Summary Table Bosch Security Systems December 13 LTC 8501 Series Systems System ComponentsLTC 8501 Series Systems LTC 8540/00 Alarm Interface Unit System Accessory ComponentsLTC 8568 and LTC 8768 Signal Distribution Units IntuiKey Series KBD-Universal KeyboardLTC 8558/00 Keyboard Extension Cable LTC 8555 Series KeyboardsLTC 8557 Series Keyboard Extension Kits LTC 8560 and LTC 8561 Series Receiver/Driver UnitsLTC 8712 Series Console Port Expander Units LTC 8770 Switcher Follower SeriesLTC 8713 Alarm Port Expander Units LTC 8781 Series Data Converter Units LTC 8780 Series Data Converter UnitsLTC 8016/90 Bilinx Data Interface Unit LTC 8785 Series Code ConvertersLTC 8850/00 Windows Based Graphical User Interface Software LTC 8059/00 Master Control SoftwareSFT-INTSRV Allegiant Integration Software Integration ServerLTC 8506/00 PC-to-Console Port RS-232 Cable LTC 8506/00 PC-to-Console Port RS-232 CableAllegiant Satellite Software Development Kit Tion provided at the end of this manual LTC 8500 Series Video Switching ConfigurationLogging Printer Data Video Input Modules Installation ProcedureMain CPU Bay Installation Video Output Modules Video Output ModulesCPU Module Termination Practices Camera and Monitor Video ConnectionsLTC 8500 Series Video Terminations Monitor Output Video ConnectionsGeneral Accessory Installation Optional Accessories InstallationLogging Printer Option Installation Procedures not coveredComputer Computer Interface InstallationSatellite Site Trunk Line Monitor Outputs Satellite Configuration InstallationsSatellite Site Trunk Line Monitor Outputs Satellite Site Programming Requirements Main Site Trunk Line Video InputsControl Data Lines in Satellite Systems Main Site Programming Requirements Main Site Programming RequirementsMing of the main site via a system keyboard Page Alarm Inputs in Satellite Systems Alarm Inputs in Satellite Systems Feature SelectionLTC 8501 Series Rear Panel Main Power ConnectionsTime / Date Video Monitor DisplayMonitor Title/System Status Display Monitor MessageSystem Status Display Monitor Title/System Status Display Bosch Security Systems December 13 User Selectable DIP Switch Settings for Main CPU Bay Factory Default SettingsUpper CPU DIP Switch S1001 User Selectable DIP Switch Settings for Main CPU BayLower CPU DIP Switch S1002 Keyboard model Supported protocols Boards are initially logged-off Drivers without using an LTC 8785 Series Code Converter unitSettings Console Port Printer Port Alarm Port Keyboard Ports User Priority Levels User InformationSystem Function User Priority Access TableUser Priority Access Table Basic Alarm Response Mode Alarm InformationAuto Build Alarm Response Mode Sequence and Display Alarm Response ModeAlarm Activated Pre-position Alarm Activated Pre-positionSample Alarm Responses None Alarm Relay Response Alarm Relay ResponseKeyboard Log-in Procedure System CommandsKeyboard Operation IntuiKey button textControlling Camera Movement Switcher CommandsLock or Unlock Control of a Monitor Alarm activations are defaulted to call preposition sceneRecording a Camera Pre-position Scene Recalling a Camera Pre-position SceneAlarm Commands Alarm CommandsArm/Disarm Individual Alarms Alarms Acknowledgement Arm/Disarm All AlarmsSequence Control Arm/Disarm MonitorStop a Running Sequence Run a SequenceControlling Sequence Direction Sequence ControlProgramming a Simple Camera Sequence Sequence ProgrammingKey Description Sequence Function SummarySequence Programming Camera Monitor Dwell Programming a SalvoSwitching Camera SequenceGeneral Information Keyboard User FunctionsGeneral Information These functions are listed in the table shown below Key User Function 1 Local Keyboard TestUser Function 2 Show Keyboard Port Number User Function 4 Adjust Position of Monitor OverlayUser Function 3 Select Keyboard Beeper ON/OFF User Function 6 Select Monitor Display OptionUser Function 7 Set Time User Function 10 Change User PasswordUser Function 8 Set Date User Function 9 Set Camera IDUser Function 13 Print System Configuration Tables User Function 12 Default All Monitor OverlaysUser Function 16 Time Event Enable/Disable User Function 11 Select Time / Date FormatUser Function 21 Designate Alarm Monitor Type User Function 19 Select Alarm ResponseUser Function 18 Print Sequence User Function 20 Select Printer VerbosityUser Function 24 Set Positions on All Monitor Displays User Function 23 Display CPU Software Version NumberUser Function 25 Set Brightness on All Monitor Displays User Function 26 Set Display Option On All MonitorsUser Function 32 Set Alarm RS-232 Parameters User Function 29 Reset RS-232 Parameters to DefaultUser Function 28 Select Console Log-in User Function 30 Set Console RS-232 ParametersUser Function 37 R/D Address Mode User Function 34 Camera IndicatorUser Function 38 Printer Port Mode User Function 35 Controllable CamerasGeneral Information User Function 99 User Function Index User Function 42 Keyboard Log-in Auto-off ModeUser Function 43 CPU Battery Status Cleaning the Keyboard Maintenance InformationCleaning the Keyboard AC Line Voltage Input SelectionReplacement of Memory Backup Batteries AC Line Fuse ReplacementPower Supply Fuse Replacement Replacement of Memory Backup Batteries Character ROM Tables for LTC LTC 8500 Character ROM Table Error Messages Replacement of Memory Backup Batteries Bosch Security Systems December 13 Main Bay Checkout Troubleshooting GuideKeyboard Checkout Main Bay CheckoutRemote Receiver/Driver Functions Inoperative No Alarm ResponseVideo Monitor Display Checkout CPU Software Version Numbers CPU Software Version NumbersGlossary of Terms CPU Software Version Numbers Appendix a Satellite Systems Allegiant Satellite Concepts Model No Maximum Number System Cameras CPU Software Version Numbers Conceptual Diagram of Allegiant Satellite Switching System Conceptual Diagram of Allegiant Satellite Switching SystemConceptual Diagram of Dual Master Allegiant Satellite System Conceptual Diagram of Cascaded Allegiant Satellite System Conceptual Diagram of Cascaded Allegiant Satellite SystemMain BAY Hardware Installation Appendix B Installation ChecklistsAppendix C Quick Reference Cable Interconnections Alarm Interface UnitMain Bay Video KeyboardsReceiver/Drivers Signal Distribution UnitAlarm Port RS-232 Pin-outs Main Bay Rear Panel Connector Pin-outs and Cable Pin-outConsole Port RS-232 Pin-outs Keyboard RS-485 PortsComm Port 1 and Comm Port CPU Software Version Numbers Code Port Pin-outsCTS RTS Page Bosch Security Systems December 13 Page Europe, Middle East, Africa Asia-Pacific
Top Page Image Contents