Mounting | Remove | Remove |
|
Installation
When selecting a location to mount your Kicker amplifier be sure it is structurally sound and that there are no items behind the area that could be damaged by the screws. Check for wiring harnesses, brake lines, fuel lines, gas tanks, etc.
All amplifiers generate heat under normal operation. Be sure to choose a location that allows adequate ventilation for the amplifier. Also consider that the air temperature inside an automobile’s trunk can reach upwards of 140 degrees fahrenheit (60° celsius). An amplifier mounted here may require additional cooling needs such as fans or venting to allow cool operation. If possible, mounting the amp in the passenger compartment will allow cooler operation.
Remember that the controls on top of the amp will need to be accessible for adjustment later. Keep this in mind as you choose your amplifiers mounting location.
Now that you are ready to mount your amplifier, use the supplied 3mm allen wrench to remove the amplifier EndKaps. This will give you access to the mounting holes in the amplifier and all wiring connections.
NOTE: Objects in the manual are larger than they appear! Pictures and diagrams of the massive KX2500.1 in this manual are not to scale...this was done to prevent having a manual the size of your average wakeboard.
RemoveRemove
With the shroud removed, drill 4 holes using a 7/64” (2.75 mm) drill bit and use the supplied #8 screws to mount the amplifier.
4 | KX2500.1 Amplifier |