Speco Technologies SIPSD37X, HTSD37X specifications Pattern Setup, ‰ Pattern Edit

OSD MENU 4

Pattern Setup

PATTERN SETUP

------------------------

PATTERN NO. 1 UNDEFINED

CLR PATTERN CANCEL RUN PATTERN

<EDIT PATTERN>

BACK

EXIT

‰Pattern Edit

EDIT PATTERN 1

------------------------

MOVE TO START POSITION [NEAR:START /FAR:CANCEL]

zPattern Number [1~4 ]

Selects a Pattern number to edit. If the

selected pattern number is not defined, "UNDEFINED" will be displayed under the selected pattern number.

zClear Pattern [CANCEL/OK]

	Deletes the data of the selected pattern.
zRun Pattern	Runs the Pattern for the test purposes to
	check if it works properly.
z Edit Pattern	Edits the selected pattern.

①With the Joystick of your controller, move the camera to the start position with an appropriate zoom magnafication. To start the pattern recording, press NEAR key. To exit, press FAR key.

EDIT PATTERN 1

[NEAR:SAVE /FAR:DELETE] 0/0/x1/N

②Move camera with joystick of controller or run preset function to memorize the path (mostly curve path) in the selected pattern. The movement by Joystick and preset movement will be memorized in a pattern. After a pattern is programmed, the remaining storage is displayed in progress bar on the screen.

③To save the data and exit, press NEAR key. To cancel saving the data and delete the data, press FAR key.

37X Speed Dome Camera 40/50