Speco Technologies HTSD37X, SIPSD37X specifications Swing Setup

OSD MENU 4

Swing Setup

SWING SETUP
------------------------
SWING NO.	1
1ST POS.	NOT USED
2ND POS.	NOT USED
SWING SPEED	30/SEC
CLEAR SWING	CANCEL
RUN SWING
BACK
EXIT

zSwing	[1~8]
Number	Selects a Swing number to edit. If the
	selected Swing is not defined, "NOT USED"
	is displayed in the 1st Position and the 2nd
	Position.
z1st Position	[PRESET 1~128]
2nd Position	Sets the 2 positions for a Swing function. If
	the selected preset is not defined,
	"UNDEFINED" is displayed as shown
	below.
	SWING SETUP
	------------------------
	SWING NO.	1
	1ST POS.	PRESET5
	2ND POS.	NOT USED
		UNDEFINED
	When a swing function runs, the camera
	moves from the preset assigned as the 1st
	point to the preset assigned as the 2nd
	point in CW(Clockwise) direction. Then
	the camera moves from the preset
	assigned as the 2nd point to the preset
	assigned as the 1st point in CCW
	(Counterclockwise) direction. In case that
	the preset assigned as the 1st point and the
	preset assigned as the 2nd point are same
	or only 1 Preset position is assigned, the
	camera turns on its axis by 360° in CW
	direction and then it turns on its axis by
	360° in CCW direction.
zSwing	[1°/sec. ~180°/sec.]
Speed	Defines Swing speed between the 2 Preset
	positions from 1°/sec to 180°/sec

zClearSwing [CANCEL/OK]

	Deletes the data of the selected Swing.
zRun Swing	Runs Swing for the test purposes to check
	if it works properly.

37X Speed Dome Camera 39/50