Speco Technologies HTSD37X, SIPSD37X specifications Preset Setup, Global/Local

OSD MENU 4

Preset Setup

PRESET	SETUP
------------------------
PRESET NO.		1
CLR PRESET		CANCEL
<EDIT	SCENE>
<EDIT	LABEL>	LABEL123
RELAY	OUT	OFF
CAM ADJUST		GLOBAL

zPreset	[1~128]
Number	Selects a preset number to set up. If a
	selected preset is already defined, the
	camera moves to the pre-defined position
	and preset parameters such as Label and
	CAM Adjust show on the monitor. If a
	selected preset is not defined,
	“UNDEFINED” shows on the monitor.

BACK

EXIT

zClear Preset

zEdit

Preset Scene

zEdit

Preset Label

[CANCEL/OK]

Deletes the data of the selected Preset.

Re-defines the scene position of the selected Preset.

Edits the label of the selected Preset to show on the monitor when the preset runs. MAX. 10 alphanuberic characteristics are allowed.

zRelay Out	Defines the relay output.
zCAMAdjust	[GLOBAL/LOCAL]
	WB(White Balance) and AE(Auto
	Exposure) can be set up independently for
	each preset. There are 2 modes, "Global"
	mode & "Local" mode. The Global mode is
	that WB and/or AE are/is set up totally and
	simultaneously for all presets. The Global
	parameter setup such as WB and AE can
	be done in "ZOOM CAMERA SETUP" menu.
	The Local mode is that WB and/or AE
	are/is set up independently or separately
	for each preset. The Local parameter setup
	for WB and AE can be done in each preset
	setup menu. Each Local parameter such as
	WB and AE activates correspondingly
	when the camera arrives at each preset
	position. During jog operation, Global
	WB/AE value should be applied. All Local
	WB/AE values do not change although
	Global WB/AE value changes. The Local
	mode has the prior to the Global mode.

37X Speed Dome Camera 37/50