TP-Link TL-SC2020N manual Status of Wireless Networks

Page 34

Status of Wireless Networks

WLAN: Select Enable to enable the wireless function; select Disable to disable the function.

Device Mac address: This displays the MAC address of the Camera.

IP address: This displays the IP address of the Camera. It displays blank, 0.0.0.0 or an IP Address. When it is blank, the Camera doesn’t establish physical link with access point. The 0.0.0.0 means that physical link is established, and that Camera is trying to get the IP address. When it displays an IP address, users can use wireless network.

Status of Wireless Networks

The list above is the result of network scan. The network currently linked to will be shown in blue. The following information is provided.

ESSID - The name of a wireless network (or ad-hoc device). If the same name occurs several times this means that several access points for that network were found. The Camera cannot be configured to only associate with one particular access point.

Signal strength - Shows the signal strength.

Security - Shows which type of security the network uses. See below for the security types supported by the Camera.

Radio Type - Displays the radio type of the wireless network.

Mode - Shows if the network type is Managed (access point or router) or Ad-Hoc (another client).

Channel - Shows the wireless channel currently in use.

Click the Connect button to connect the Camera to the selected wireless network. The ESSID will be automatically filled in and the IP address of the Camera will be obtained automatically.

Click the Disconnect button to disconnect the Camera from the wireless networks.

Click the Manual button to connect the Camera to a wireless networks. The ESSID can be manually filled in; the IP address of the Camera can be obtained automatically or assigned manually.

Click the Refresh button to rescan the existing wireless networks in the local area.

To connect to a network, please follow the instructions below:

If you want to automatically obtain the IP address of the Camera, you can select a wireless network and then click Connect. The network wireless setting page will display. Enter the Passphrase twice and click “Save” to apply the settings.

26

Image 34

Contents TL-SC2020N Wireless N Network Camera Rev: 1.0.0COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure StatementCountry CE Mark WarningNational Restrictions RestrictionNCC Notice Industry Canada StatementKorea Warning Statements 당해 무선설비는 운용중 전파혼신 가능성이 있음Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYTP-LINKTECHNOLOGIES CO., LTD TP-LINKTECHNOLOGIES CO., LTDChapter 3 Using Camera via Web Browser Package ContentsChapter 1 Safety Instructions Chapter 5 Configuration of Main MenuAppendix access InternetC. System Requirement – Help to setup System Europe – EU Declaration of ConformityPackage Contents NoteChapter 1 Safety Instructions 2.1 System Requirement 2.2 Product FeaturesNote 2.3 Physical Overview 2.3.1 Front ViewPower Jack LAN Port WPS LED Indicator 2.3.2 Rear ViewRESET Button WPS Button Base Plate 2.4.1 The Screw Size 2.4 Mount the Camera2.5 Hardware Connection 2.4.2 Wall and Ceiling Mount2.5.1 Wired Connection 2.5.2 Wireless Connection by WPSChapter 3 Using Camera via Web Browser 3.1 Obtain the IP AddressFigure Figure3.2 Windows Web Browser NotePage 4.1 Mobile Phone Viewing 4.2 Using Camera via iPhoneChapter 4 Operating Camera via Mobile Phone 4.1.1 3G Mobile Phone Streaming ViewingNote Symbols Chapter 5 Configuration of Main Menu5.1 Home Pause StopSymbols 5.1.2 Snapshot5.1.4Audio buttons Symbols5.2 Information 5.3 Basic setup5.3.1 Account Add: Click this button to add a new account 1.Click the Add button5.3.2Network 5.3.2.1 TCP/IP5.3.2.2 PPPoE Re-typePassword Re-typethe password to confirm 5.3.2.3DDNS Dynamic DNS Periodical UpdatePage 4. Type domain in the Hostname field and select sub-domain 5.3.2.4 UPnP Universal Plug and Play 5.3.2.5 Wireless NoteStatus of Wireless Networks Page Subnet mask: Enter the subnet mask 5.3.2.6WPS I.PBC Push Button Configuration methodII.PIN method 5.3.3 Image Setting White Balance5.3.4 Video 5.3.5 Audio5.3.7 Events 5.3.6 Camera setting5.3.7.7 Motion detection 5.3.7.8 e-MailSMTP Select On when you use the e-MailSMTP function. The common setting options are displayed below. Select Off, if you do not wish to use the e-MailSMTP function 5.3.7.9 FTP User Name Type the user name for the FTP server 5.4System 5.4.1 Initialize5.4.2 Date Time 5.5 Language Appendix C. System Requirement – Help to setup System EN 300 328 V1.6.1 Europe – EU Declaration of ConformityClause EN 60950-1:2001 EN 50392: DescriptionEspañol Spanish Ελληνική Greek Français French Svenska Swedish FCC Caution IMPORTANT NOTE FCC Radiation Exposure Statement