TP-Link TL-SC2020N manual Subnet mask: Enter the subnet mask

Page 36

Subnet mask: Enter the subnet mask.

Encryption – You can select TKIP or AES. Keep this option the same with that of the wireless network.

Passphrase - Enter the desired AP/ Router’s password here.

Re-type– Enter the password above again to confirm it.

Obtain an IP address automatically (DHCP) – If a DHCP server is installed and enabled on the network, to select this for the IP address can be assigned by the DHCP server.

Use the following IP address - Select this when the fixed IP address is set.

IP address: Enter the IP address of the Camera, which must be in the same subnet with that of the desired AP/ Router.

Subnet mask: Enter the subnet mask.

Default gateway: Enter the default gateway.

Obtain DNS server address automatically - If you select Obtain an IP address automatically (DHCP) above, this entry will display in the figure. Select this to obtain the address of DNS server automatically.

Use the following DNS server address - Select this when you set the fixed address as the IP address of DNS server.

Primary DNS server: Enter the IP address of the primary DNS server.

28

Image 36

Contents TL-SC2020N Wireless N Network Camera Rev: 1.0.0COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure StatementCE Mark Warning National RestrictionsCountry RestrictionIndustry Canada Statement Korea Warning StatementsNCC Notice 당해 무선설비는 운용중 전파혼신 가능성이 있음DECLARATION OF CONFORMITY TP-LINKTECHNOLOGIES CO., LTDShennan Rd, Nanshan, Shenzhen, China TP-LINKTECHNOLOGIES CO., LTDPackage Contents Chapter 1 Safety InstructionsChapter 3 Using Camera via Web Browser Chapter 5 Configuration of Main Menuaccess Internet C. System Requirement – Help to setup SystemAppendix Europe – EU Declaration of ConformityPackage Contents NoteChapter 1 Safety Instructions 2.2 Product Features 2.1 System RequirementNote 2.3 Physical Overview 2.3.1 Front View2.3.2 Rear View Power Jack LAN Port WPS LED IndicatorRESET Button WPS Button Base Plate 2.4 Mount the Camera 2.5 Hardware Connection2.4.1 The Screw Size 2.4.2 Wall and Ceiling Mount2.5.1 Wired Connection 2.5.2 Wireless Connection by WPSChapter 3 Using Camera via Web Browser 3.1 Obtain the IP AddressFigure Figure3.2 Windows Web Browser NotePage 4.2 Using Camera via iPhone Chapter 4 Operating Camera via Mobile Phone4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming ViewingNote Chapter 5 Configuration of Main Menu 5.1 HomeSymbols Pause Stop5.1.2 Snapshot 5.1.4Audio buttonsSymbols Symbols5.3 Basic setup 5.2 Information5.3.1 Account Add: Click this button to add a new account 1.Click the Add button5.3.2Network 5.3.2.1 TCP/IP5.3.2.2 PPPoE Re-typePassword Re-typethe password to confirm 5.3.2.3DDNS Dynamic DNS Periodical UpdatePage 4. Type domain in the Hostname field and select sub-domain 5.3.2.4 UPnP Universal Plug and Play 5.3.2.5 Wireless NoteStatus of Wireless Networks Page Subnet mask: Enter the subnet mask I.PBC Push Button Configuration method 5.3.2.6WPSII.PIN method 5.3.3 Image Setting White Balance5.3.4 Video 5.3.5 Audio5.3.6 Camera setting 5.3.7 Events5.3.7.7 Motion detection 5.3.7.8 e-MailSMTP Select On when you use the e-MailSMTP function. The common setting options are displayed below. Select Off, if you do not wish to use the e-MailSMTP function 5.3.7.9 FTP User Name Type the user name for the FTP server 5.4System 5.4.1 Initialize5.4.2 Date Time 5.5 Language Appendix C. System Requirement – Help to setup System Europe – EU Declaration of Conformity Clause EN 60950-1:2001 EN 50392:EN 300 328 V1.6.1 DescriptionEspañol Spanish Ελληνική Greek Français French Svenska Swedish FCC Caution IMPORTANT NOTE FCC Radiation Exposure Statement