TP-Link TL-SC2020N manual User Name Type the user name for the FTP server

Page 44

User Name: Type the user name for the FTP server.

Select On when you use FTP function. The FTP client Setting screen appears. Select Off, when you do not wish to use the FTP client function.

Note:

The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function.

FTP Server Name: Type the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server.

User Name: Type the user name for the FTP server.

Password: Type the password for the FTP server.

Re-type Password: To confirm the password, type the same characters as you typed in the Password box.

Passive Mode: Set whether you use the passive mode of FTP server or not when connecting to FTP server. Select On to connect to FTP server using the passive mode.

Test: After setting the FTP server information, you can tick the test key to test if the connection between IP CAM and FTP server works.

Effective Period: Set the period when the periodical sending is effective.

Always: The periodical sending is always effective.

Schedule: You can specify the period when the periodical sending is effective in the schedule setting in the other section.

Select Schedule and click the Schedule button, and the Schedule setting page will appear.

36

Image 44

Contents TL-SC2020N Wireless N Network Camera Rev: 1.0.0COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure StatementCE Mark Warning National RestrictionsCountry RestrictionIndustry Canada Statement Korea Warning StatementsNCC Notice 당해 무선설비는 운용중 전파혼신 가능성이 있음DECLARATION OF CONFORMITY TP-LINKTECHNOLOGIES CO., LTDShennan Rd, Nanshan, Shenzhen, China TP-LINKTECHNOLOGIES CO., LTDPackage Contents Chapter 1 Safety InstructionsChapter 3 Using Camera via Web Browser Chapter 5 Configuration of Main Menuaccess Internet C. System Requirement – Help to setup SystemAppendix Europe – EU Declaration of ConformityPackage Contents NoteChapter 1 Safety Instructions Note 2.2 Product Features2.1 System Requirement 2.3 Physical Overview 2.3.1 Front ViewRESET Button WPS Button Base Plate 2.3.2 Rear ViewPower Jack LAN Port WPS LED Indicator 2.4 Mount the Camera 2.5 Hardware Connection2.4.1 The Screw Size 2.4.2 Wall and Ceiling Mount2.5.1 Wired Connection 2.5.2 Wireless Connection by WPSChapter 3 Using Camera via Web Browser 3.1 Obtain the IP AddressFigure Figure3.2 Windows Web Browser NotePage 4.2 Using Camera via iPhone Chapter 4 Operating Camera via Mobile Phone4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming ViewingNote Chapter 5 Configuration of Main Menu 5.1 HomeSymbols Pause Stop5.1.2 Snapshot 5.1.4Audio buttonsSymbols Symbols5.3.1 Account 5.3 Basic setup5.2 Information Add: Click this button to add a new account 1.Click the Add button5.3.2Network 5.3.2.1 TCP/IP5.3.2.2 PPPoE Re-typePassword Re-typethe password to confirm 5.3.2.3DDNS Dynamic DNS Periodical UpdatePage 4. Type domain in the Hostname field and select sub-domain 5.3.2.4 UPnP Universal Plug and Play 5.3.2.5 Wireless NoteStatus of Wireless Networks Page Subnet mask: Enter the subnet mask II.PIN method I.PBC Push Button Configuration method5.3.2.6WPS 5.3.3 Image Setting White Balance5.3.4 Video 5.3.5 Audio5.3.7.7 Motion detection 5.3.6 Camera setting5.3.7 Events 5.3.7.8 e-MailSMTP Select On when you use the e-MailSMTP function. The common setting options are displayed below. Select Off, if you do not wish to use the e-MailSMTP function 5.3.7.9 FTP User Name Type the user name for the FTP server 5.4System 5.4.1 Initialize5.4.2 Date Time 5.5 Language Appendix C. System Requirement – Help to setup System Europe – EU Declaration of Conformity Clause EN 60950-1:2001 EN 50392:EN 300 328 V1.6.1 DescriptionEspañol Spanish Ελληνική Greek Français French Svenska Swedish FCC Caution IMPORTANT NOTE FCC Radiation Exposure Statement