TP-Link TL-SC2020N manual Rear View, Power Jack LAN Port WPS LED Indicator

Page 13

2.3.2 Rear View

Solid Blue: The Camera has been connected to a network.

Built-in Microphone: The location where the voice from your partner comes out.

2.3.2 Rear View

Power Jack

LAN Port

WPS LED Indicator

RESET Button

WPS Button

Base Plate

Power Jack: The power connector is where you connect the power adapter.

RESET: Press the button for more than 15 seconds, and the Camera will be restored to factory defaults.

LAN Port: Through this port, you can connect the Camera to your computer or the other Ethernet network devices.

WPS (Wi-Fi Protected Setup): This button is used to easily set up a wireless connection with the Router supporting WPS.

Step 1. Press the WPS button on the router supporting WPS for 2 seconds. Step 2. Within 2 minutes, press the WPS button on the Camera for 2 seconds.

Lock Ring: It is used to adjust the angle of the Camera.

Base Plate: It is used to support the Camera and can be fixed to a flat surface with the supplied screws.

5

Image 13

Contents Rev: 1.0.0 TL-SC2020N Wireless N Network CameraCOPYRIGHT & TRADEMARKS FCC RF Radiation Exposure Statement FCC STATEMENTNational Restrictions CE Mark WarningCountry RestrictionKorea Warning Statements Industry Canada StatementNCC Notice 당해 무선설비는 운용중 전파혼신 가능성이 있음TP-LINKTECHNOLOGIES CO., LTD DECLARATION OF CONFORMITYShennan Rd, Nanshan, Shenzhen, China TP-LINKTECHNOLOGIES CO., LTDChapter 1 Safety Instructions Package ContentsChapter 3 Using Camera via Web Browser Chapter 5 Configuration of Main MenuC. System Requirement – Help to setup System access InternetAppendix Europe – EU Declaration of ConformityNote Package ContentsChapter 1 Safety Instructions 2.1 System Requirement 2.2 Product FeaturesNote 2.3.1 Front View 2.3 Physical OverviewPower Jack LAN Port WPS LED Indicator 2.3.2 Rear ViewRESET Button WPS Button Base Plate 2.5 Hardware Connection 2.4 Mount the Camera2.4.1 The Screw Size 2.4.2 Wall and Ceiling Mount2.5.2 Wireless Connection by WPS 2.5.1 Wired Connection3.1 Obtain the IP Address Chapter 3 Using Camera via Web BrowserFigure FigureNote 3.2 Windows Web BrowserPage Chapter 4 Operating Camera via Mobile Phone 4.2 Using Camera via iPhone4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming ViewingNote 5.1 Home Chapter 5 Configuration of Main MenuSymbols Pause Stop5.1.4Audio buttons 5.1.2 SnapshotSymbols Symbols5.2 Information 5.3 Basic setup5.3.1 Account 1.Click the Add button Add: Click this button to add a new account5.3.2.1 TCP/IP 5.3.2Network5.3.2.2 PPPoE Re-typePassword Re-typethe password to confirm Periodical Update 5.3.2.3DDNS Dynamic DNSPage 4. Type domain in the Hostname field and select sub-domain 5.3.2.4 UPnP Universal Plug and Play Note 5.3.2.5 WirelessStatus of Wireless Networks Page Subnet mask: Enter the subnet mask 5.3.2.6WPS I.PBC Push Button Configuration methodII.PIN method White Balance 5.3.3 Image Setting5.3.5 Audio 5.3.4 Video5.3.7 Events 5.3.6 Camera setting5.3.7.7 Motion detection 5.3.7.8 e-MailSMTP Select On when you use the e-MailSMTP function. The common setting options are displayed below. Select Off, if you do not wish to use the e-MailSMTP function 5.3.7.9 FTP User Name Type the user name for the FTP server 5.4.1 Initialize 5.4System5.4.2 Date Time 5.5 Language Appendix C. System Requirement – Help to setup System Clause EN 60950-1:2001 EN 50392: Europe – EU Declaration of ConformityEN 300 328 V1.6.1 DescriptionEspañol Spanish Ελληνική Greek Français French Svenska Swedish IMPORTANT NOTE FCC Radiation Exposure Statement FCC Caution