EverFocus EPH5212 user manual General Setup, Motion Setup

Issue: 1.0

▲/▼: move joystick up and down for selecting an item.

/: move joystick left and right for moving an item.

◀/▶[Open]/ [Near]: move joystick right to select or save settings or go to edit pages.

▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).

3.6.1 General Setup

This menu control general function of dome.

Power-up Action is a function (preset, tour, pattern and scan) to be performed when the power is re-cycled or after alarm action. The following settings are available. Set the dome ‘On’ (default) to resume its prior activity.

- Use the joystick [ ] to select On/Off

Turbo Speed defines the pan and tilt speed only for manual operation of Pan/Tilt. - Use the joystick [ ] to select On/Off

Preset Speed is possible to set preset speed with 3 options. : Fast, Normal, and Slow.

-Use the joystick [▶] to select {Preset Speed}

-Press [Open] button or use joystick to save settings.

-Press [Close] button or use joystick to return to previous menu (Back).

3.6.2 Motion Setup

25