Issue: 1.0
Warnings and Cautions
If you fail to read this information and handle the product incorrectly, death or serious injury may occur. This device MUST be securely anchored to a solid surface in a manner that will resist wind, snow and ice loading, and any other hazard which might compromise the security of the mounting.
*Precautions &
Should any liquid or foreign material enter the dome, unplug the dome and have it checked by qualified personnel before operating it any further.
Do not install the dome in an environment which exceeds the specifications of the unit. Avoid excessive dust and mechanical vibration.
The dome was designed to be weather resistant (IP66). The unit should not be immersed in water or any other liquid.
Clean the dome with a damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzene as they might damage the finish of the unit.
Retain the original carton and packing materials for safe transport of this unit in the future.
Important Safeguards
Read this manual carefully.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with dry or damp soft cloth.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. Protect the power cord and other cables from abrasion or being pinched particularly at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Lightning protection is recommended.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as if the
CAUTION – These installation instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any service other than that contained in the operating instructions unless you are qualified to do so.
Use a certified/listed power supply transformer only.
Never move Pan/Tilt with your hands. It may cause serious damage to the camera.
The unit should be installed by trained personnel.
3