EverFocus EPH5212 user manual Issue

Page 6

Issue: 1.0

*The HDcctv Alliance states

Look for the unique HDcctv logo to be sure:

￿100m transmission over even low-grade RG59

￿Plug-and-play interoperability with other compliant products

￿Forward compatibility with future versions of the standard

￿See www.hidefcctv.org for details

1.3System Configuration

1.4 Termination Settings [SW303: Refer to 2.4 Dome Camera Settings]

To prevent malfunctions and/or interference with communication signals between the camera and controller, the domes (shaded with gray color) at the end of line must have their terminations set to ON. All other domes in the “chain” should have their terminations set to OFF.

6

Image 6
Contents User’s Manual Model EPH5212 HDcctv 12X IP66 Speed Dome Contents Important Safeguards Page Features DescriptionIssue Installation and Connection Package ContentsBase Installation Connecting Video Jack Connection Interface and Wiring cablesConnecting the RS-485 lines Connecting AlarmsSetting RS-485 Parameters Setting the address ID of dome cameraSetting the analog video format and RS-485 protocol SW302 SW301SW303 Issue Next Page Continue Page Accessing to Main Menu 95 + Preset/ Menu Getting StartedEditing a Title System Setup Menu Main MenuSystem Information Initialize Display Setup Menu Entering a PasswordLanguage Page Camera Setup Menu Image SetupMD Motion Detection Focus/Zoom Page Shut PRI BLC/WDR/HSBLC/DNR General Setup Motion SetupHome Action Setup Preset Menu Calibration SetupPage Tour Menu Auto Scan Menu To save settings Settings Troubleshooting Guide Problem SolutionSpecifications General Specifications24VAC Dimensions Unit mmAPPENDIX. RS-485 Function List Pattern