EverFocus EPH5212 user manual Settings

Issue: 1.0

/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).

-Enter into {Main Menu}

-Using the joystick [ ], select Alarm Input type (NO/NC).

-Using the joystick [▶], select Alarm Output (On/Off)

- Alarm priority can be set using the joystick [ ],

- Change an action/number {Off, Preset, Pattern, Scan, or Tour}.

- Set Alarm action time (Dwell Time): 3~60sec/On, default setting is ‘ON’.

-> Time Out (3~60sec): This is activated during a period of a selected dwell time when an alarm is triggered.

-> Momentary (On): When an alarm is triggered, the dome camera will maintain alarm activation continuously,

until it is stopped manually (96+preset or/and changing in alarm menu).

- It is possible to clear saved {Alarm No.xxx}, pressing [Wide] button at a position of {No.xxx} individually.
- Press [Open] button or use joystick [ ] to save▶	settings.

- Press [Close] button or use joystick to▶return to previous menu (Back).

NOTE* In order to call an action (Preset, Pattern, Tour or Scan), you must save Preset, Pattern, Tour, or Scan first. To pause alarming (about 10sec) temporarily, press [ESC] button or [96+preset]

32