First Alert FA162C user manual Code must be entered twice

SECURITY CODES

To Add a User or Change a User's

Code

Important: Temporary users of the system (e.g., babysitters, cleaning staff, etc.) should not be shown how to use any system function they do not need to know, such as bypassing protection zones for example.

Sequential key depressions for all steps in a procedure must be made within 2 seconds of one another, or else the entire entry is aborted and must be repeated from its beginning (e.g., perform steps 1, 2, and 3 below with no delay between steps).

(Master Code) CODE

1. +

2.

(User Number)

3.

(User's Code)

To Delete a User

(Master Code)

8Enter your 4-digit master code then press CODE key.

Enter 2-digit user number.

Enter the 2-digit User Number (03–16) for the user you are adding or changing.

Enter 4-digit user's code.

Enter the new 4-digit security code for that user.

CODE

+

2.

(User Number)

8

Enter master code then press CODE key.

Enter 2-digit user number to be deleted.

Enter the 2-digit User Number (03–16) for the user whose code you are deleting.

Wait (about 3 seconds) until the keypad beeps once before pressing any other key. The code is automatically deleted.

To Change Your Master Code

Original Master Code

+

CODE	Master’s User No. New Master Code		New Master Code	Note that the new Master
8	+ 0 2	+	+	Code must be entered twice.

– 28 –