First Alert FA162C user manual Arming ALL Protection, Enter Security Code then Press Away, Listen

2

Using the AWAY Key

ARMING ALL PROTECTION

(With Entry Delay ON)

Use this key when no one will be staying on the premises.

When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened, or if any movement is detected inside the premises. You may leave through the entrance door during the exit delay period without causing an alarm. You may also re-enter through the entrance door, but must disarm the system within the entry delay period or an alarm will occur.

Close all protected perimeter windows and doors before arming (see CHECKING FOR OPEN ZONES section). The green READY indicator on the keypad should be lit if the system is ready to be armed.

1.

2.

AWAY

+ 2

(Security Code)

ARME D ** AWAY **

YOU MAY E XIT NOW

The "You May Exit Now" portion of the message disappears when the exit delay expires.

ENTER SECURITY CODE THEN PRESS AWAY

Example: 7 2 9 6 then press the AWAY key.

LISTEN

The keypad will beep twice, or beep continuously if an exit warning has been programmed for your system, and displays the armed AWAY message. The red ARMED indicator also lights.

2-Partition AWAY	In a two-partition system, you can arm both partitions in the AWAY mode at the same time if the
Arming	same master code is assigned to both partitions. You can do this from either partition's keypad.
	This procedure is not applicable to disarming or any other system function.
	(Continued)

– 17 –