Huawei HG622 manual 3Setting the Internet Access Parameters, 2.4Powering On

Page 12
2.4Powering On

2.4Powering On

To power on the HG622, press the ON/OFF button on the side panel of the HG622.

After you power on the HG622, the DSL indicator blinks (for less than three minutes), which indicates that the HG622 is being activated. Later, the DSL indicator turns solid on. The POWER indicator is also solid on, which indicates that the HG622 is working properly.

3Setting the Internet Access Parameters

The HG622 supports VDSL2 uplink and High-Speed Packet Access (HSPA) uplink through Huawei HSPA data card. Realizes dynamic mutual backup of voice and data services through the DSL link and HSPA link.

3.1Configuring the HSPA uplink

When the HG622 is working through the Huawei HSPA data card, you need to install the Huawei HSPA data card on the HG622 so that your PC can connect to the Internet through HSPA uplink. To create a HSPA uplink connection, do as follows:

Step 1 Log in to the Web-based configuration utility.

1.Launch the Internet Explorer on your computer. Enter http://192.168.1.1 in the address bar, and then press Enter.

2.In the displayed dialog box, enter the user name and the password, and then click Login.

By default, both the user name and the password are admin. After the user name and the password are verified, you can access the Web-based configuration utility.

Step 2 Click Basic > WAN in the navigation tree to display the WAN Connection Page.

Step 3 Click the connection whose access type is UMTS. Step 4 Select Enable for WAN connection.

Step 5 Enter the APN and the Dial number that are provided by the network operator in the APN text box and the Dial number text box.

Step 6 Enter the user name and password in the User name and Password text boxes that you can configure.

Step 7 Click the Submit button to finish the UMTS settings.

If you want to verify the PIN code of your SIM card, then do as follows:

7

Page 11 Page 13
Image 12
Page 11 Page 13
Contents User Guide HUAWEI HG622 Home GatewayV100R001 HUAWEI HG622 Home GatewayIssue User GuideNO WARRANTY Trademarks and PermissionsImport and Export Regulations Contents 7.3 Default Settings 7.4 Technical Specifications7.2 Interfaces and Buttons 1Warnings and Precautions Environmental Requirements for Using the DeviceBasic Requirements Precautions for Using Wireless Devices Accessory RequirementsSafety of Children Areas with Inflammables and ExplosivesMaintenance 2 Connecting the Cables and Powering On 2.1Simple Connection2.2Connecting One Telephone RESET POWERLINE PHONE MODEM2.3Connecting Multiple Telephones 3Setting the Internet Access Parameters 2.4Powering On3.1Configuring the HSPA uplink 3.2Configuring the DSL uplink Using the PPP Dial-UpSoftware on Your Computer 4 Configuring the Wireless Network Connection Setting Up a Wireless Connection Manually 5Basic Configuration 5.1Changing the Administrator Password5.2Enabling or Disabling the Wireless 5.3Changing the Wireless Network Name andthe Access Password Network Function5.4Changing the Login IP Address 5.5Downloading Files Through the USB PortStep 1 Choose Advanced USB Port 6FAQs 5.6Restoring Default SettingsPage 2.Choose Tools Internet Options Step 2 Place your terminal in an open area Step 3 Place your computer close to your terminal7.1Indicators 7AppendixIndicator StatusDescription INTERNET7.2Interfaces and Buttons Interface orButton Description7.3 Default Settings 7.4Technical SpecificationsSetting SpecificationSpecification WeightHuawei Industrial Base Bantian, Longgang Shenzhen Part Number
Top Page Image Contents