5.4Changing the Login IP Address

Step 5 Enter the new access password in the WPA pre-shared key text box. Step 6 Select AES from the WPA encryption drop-down combo box. Step 7 Click Submit to save the settings.

5.4Changing the Login IP Address

To make the login IP address easy to remember, you can change the IP address after logging in to the Web-based configuration utility.

To change the IP address, do as follows:

Step 1 Choose Basic > LAN in the navigation tree. Step 2 Select the DHCP page.

Step 3 Enter a new IP address as desired in the IP address text box. Then, enter a subnet mask in Subnet mask.

Step 4 Click Submit to save the settings.

To log in to the Web-based configuration utility after you change the IP address successfully, you need to launch the Internet Explorer, and then enter the new IP address in the address bar. Ensure that the IP address of the computer is in the same network segment as that of the HG622 so that the computer can access the Web-based configuration utility.

5.5Downloading Files Through the USB Port

After a portable storage device is connected to the USB port on the rear panel of the HG622, you can configure the HG622 as a File Transfer Protocol (FTP) client. Through the HG622, the files on the FTP server can be downloaded to the removable storage device.

To download files through the HG622, do as follows:

Step 1 Choose Advanced > USB Port.

Step 2 In the User name and Password text boxes, enter the user name and the password.

Step 3 In Download URL and Port text boxes, enter the Uniform Resource Locator (URL) address and port used for downloading files from the FTP server.

Step 4 Click the Device drop-down list box, and then select the storage device partition used for saving downloaded files.

Step 5 In the Local path text box, enter the path used for saving downloaded files. Step 6 Click Download.