Huawei HG622 manual 3.2Configuring the DSL uplink

Step 1 Click Advanced > PIN in the navigation tree to display the PIN Page. Step 2 Enter the original PIN number in the PIN text box.

Step 3 Click the Submit button to finish the settings on the PIN Page.

Use the default values for the other parameters. In general, they do not need to be configured.

3.2Configuring the DSL uplink

By configuring the HG622 and your computer, you can choose any of the following methods to surf the Internet:

zUsing the Embedded PPP Dial-Up Software on the HG622

zUsing the PPP Dial-Up Software on Your Computer

Using the Embedded PPP Dial-Up Software on the HG622

If you select this method for accessing the network, the HG622 starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer. You do not need to install any special dial-up software on your computer or perform dial-up operations on your computer. To configure the HG622 and your computer for the network access, do as follows:

Step 1 Log in to the Web-based configuration utility of the HG622. Step 2 Configure the ATM PVC.

1.In the navigation tree, choose Basic > ATM.

2.Enter VPI/VCI provided by the Internet Service Provider (ISP).

3.Select EoA from the DSL link type option button.

4.Click Submit.

Step 3 Set WAN parameters.

1.In the navigation tree, choose Basic > WAN.

2.Select a PVC from the Layer2 interface drop-down combo box.

zThe name of this PVC should begin with atm.

z The DSL link type of this ATM PVC should be EoA.

3.Select Enable for WAN connection.

4.Select a service from the Service list drop-down list box.

5.Select a LAN interface from the Port binding check box.

6.Select Route from the Connection mode drop-down list box.

7.Select PPPoE from the Connection type option button.

8.Enter the User name and Password provided by the ISP.

9.Click Submit.

8