5.2Enabling or Disabling the Wireless

Step 5 Click Submit to save the settings.

After you change the password successfully, the current page jumps to the page for logging in to the Web-based configuration utility. To log in to the Web-based configuration utility, enter the new password, and then click Submit.

If you forget the user name or password that has been changed, you can restore the default settings of the HG622 by pressing and holding the RESET button for over six seconds. Then, the user name and password that are used for logging in to the Web-based configuration utility are restored to default values. After you restore the default settings, however, your customized data is lost. Therefore, use this function with caution.

5.2Enabling or Disabling the Wireless

Network Function

You can quickly enable or disable the wireless network function by pressing the WLAN button on the HG622. To enable the wireless network function, press and hold the WLAN button for over one second, and then release the button. You can disable the wireless network function in the same way. The WLAN indicator shows whether the wireless network function is enabled.

In addition, you can enable or disable the wireless network function through the Web-based configuration utility. To enable or disable the wireless network function, do as follows:

Step 1 Log in to the Web-based configuration utility.

Step 2 In the navigation tree on the left, choose Basic > WLAN. Step 3 Select or not select the Enable WLAN option.

Step 4 Click Submit to save the settings.

5.3Changing the Wireless Network Name and

the Access Password

To change the name and access password for the wireless network, do as follows (taking the authentication type WPA-PSK as an example):

Step 1 Log in to the Web-based configuration utility.

Step 2 In the navigation tree on the left, choose Basic > WLAN. Step 3 Enter the new wireless network name in the SSID text box. Step 4 Select WPA-PSKfrom the Security drop-down combo box.