The WPS indicator of the HG622 becomes on from the blinking state, indicating that the HG622 is connected to your PC through the WLAN. This state lasts 300s. Then the WPS indicator turns off.
If the WPS indicator does not blink, it indicates that the WPS function cannot be enabled. Note that the WPS function can be used only when the wireless network function is enabled and the wireless network security mode of the WLAN is set to
Setting Up a Wireless Connection Manually
If your network adapter does not support the WPS function, you can set up a wireless connection between your PC and the HG622 manually. To manually set up a wireless connection, use either of the following methods:
zUse the tool provided by your network adapter.
For details, see the user guide of your network adapter.
zUse the wireless configuration software provided by the operating system of your PC.
This section takes Windows XP as an example and describes how to set up a wireless connection between your PC and the HG622 manually, do as follows:
Step 1 Enable the wireless network function, and set the wireless network name and access password of the HG622.
1.Log in to the
2.In the navigation tree on the left of the
3.Select the Enable WLAN option.
4.Enter a wireless network name in the SSID text box.
5.Select
6.Enter an access password in the WPA
7.Select AES from the WPA encryption
8.Click Submit to save the settings.
Step 2 Enable the wireless configuration service provided by Windows XP.
1.
2.In the Computer Management window, choose Computer Management (Local) > Services and Applications >Services.
3.From the services listed in the right pane of the Computer Management window,
4.In the Wireless Zero Configuration Properties (Local Computer) dialog box, check whether Service status is Started. If not, click Start.
11