Configuring the Wireless Network Connection

You need to perform the preceding operations only once for creating a network connection. After the network connection is created, to access the network, double-click the icon for the dial-up connection, and then click Connect in the displayed dialog box.

4 Configuring the Wireless Network Connection

If a wireless network adapter is installed on your computer, you can connect you computer to the HG622 through a wireless connection.

The hardware installation methods and driver installation methods of wireless network adapters provided by different companies vary from each other. For details, see the installation guide provided by the wireless network adapter provider.

Setting Up a Wireless Connection Through the WPS Button

The HG622 supports the Wi-Fi Protected Setup (WPS) function. If your network adapter also supports the WPS function, you can use the WPS function to set up a wireless connection between your PC and the HG622 quickly. To set up a wireless connection, do as follows:

Step 1 Enable the wireless network function, and set the wireless network name and access password of the HG622, do as follows (taking the authentication type WPA-PSK as an example):

1.Log in to the Web-based configuration utility of the HG622.

2.In the navigation tree on the left of the Web-based configuration utility, choose Basic > WLAN.

3.Select the Enable WLAN option.

4.Enter a wireless network name in the SSID text box.

5.Select WPA-PSKfrom the Security drop-down combo box.

6.Enter an access password in the WPA pre-shared key text box.

7.Select AES from the WPA encryption drop-down combo box.

8.Click Submit to save the settings.

Step 2 Press the WPS button of the HG622 to enable the HG622 to enter the WPS negotiation state.

Step 3 Enable the WPS negotiation function of the wireless network adapter on your PC within two minutes, and then wait for a moment (typically 10s and at most 120s).