DMP Electronics Comprehensive DMP Keypad Programming for Enhanced Home Security

Operator’s Guide

Set System Time/Date

This selection allows you to set the correct time and date on the SCS-1R. All changes made in this selection print to the Activity Log printer. The time entered here is sent to panels if the Time Change programming option is set to YES.

SCS-1R Menu Time/date

TUE 12:05 Pm 04/07/09

Set Time/date Time date

ENTER TIME:

- : AM PM

ENTER DATE: - / /

TIME CHANGED

Time/Date

Press any top row Select key to display the time and date. Press the COMMAND key to advance to the next section of programming.

Current Time/Day/Date

Press the COMMAND key to program the time and/or date. Press the Back Arrow key to return to the previous display.

Set Time/Date

Press the top row Select key under the item you would like to change. For example, press the far left Select key to change the SCS-1R time.

Time

Press any top row Select key to enter the new time. Using the Digit keys on the keypad, enter the current time and then press Select key under AM or PM. TIME CHANGED displays after the time has been changed.

Date

Press any top row Select key to enter the date. Enter the month, date, and year in the following format: MM/DD/YY, with leading zeroes. Press COMMAND to accept the date and display the following prompt.

Time/Date Changed

If the Time or Date has been changed successfully, the display will show TIME/DATE CHANGED.

Exit Programming Menu

Exit Menu allows you to properly end programming and exit the menu.

SCS-1R Menu

STOP

Exit Menu

Press any top row Select key to exit the SCS-1R menu.

SCS-1R Installation Guide Digital Monitoring Products

23