Kenmore 153.330642 Fire or Explosion Hazard, Fire Hazard, Breathing Hazard Carbon Monoxide Gas

Page 3

Read and understand instruction

manual and safety messages before installing, operating or

servicing this water heater.

Failure to follow instructions and safety messages could result in

death or serious injury. Instruction manual must remain with water heater.

Water temperature over 125°F (52°C) can cause severe burns instantly resulting in severe injury or death,

Children, the elderly, and the physically or mentally disabled are at highest riskforscald injury.

Feel water before bathing or showering.

Temperature limiting valves are available.

Read instruction manual for safe temperature setting

Fire or Explosion Hazard

•Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

•Avoid all Lgnition sources if you smell LP gas.

•Do not expose water heater control to excessive gas pressure.

•Use only gas shown on rating plate.

•Maintain required clearances to combustibles.

•Keep ignition sources away from faucets after

extended period of non-use.

JllmLI

installing, using or sewicing Read instructionwater heatermanual. before

Fire Hazard

For continued protection against riskof fire:

•Do not install water heater on carpeted floor.

•Do not operate water heater if flood damaged.

Explosion Hazard

•Overheated water can cause watertank explosion.

•Properly sized temperature and pressure relief valve must be installed in opening provided.

Breathing Hazard - Carbon Monoxide Gas

•Install vent system in accordance with codes.

•Do not operate water heater if flood damaged.

•High altitude orifice must be installed for operation above 2,000 feet (610 m),

•Do not operate if soot buildup.

•Do not obstruct water heater air intake with insulating jacket,

•Do not place chemical vapor emitting products near water heater,

•Gas and carbon monoxide detectors are available.

Breathing carbon monoxide can cause brain damage or death. Always read and understand instruction manual.

Improper installation and use may result

in property damage.

•Do not operate water heater if flood damaged.

•Inspect and replace anode.

•Install in location with drainage.

•Fill tank with water before operation.

•Be alert for thermal expansion.

Refer to instruction manual for installation and service.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Gallon Short GallonImportant Definitions Explosion Hazard Improper installation and use may result Property damageFire or Explosion Hazard Fire HazardBurner Door Assembly Piezoelectric Temperature Pressure Relief Valve 13-14 Filling the WaterTemperature Regulation Burner Door Assembly Ultra Low NOx Natural Gas Burner90F Rise Jacket TOP Additional Tools Needed When Sweat Soldering Materials NeededBasic Tools Pilot & Main Burner GET to Know Your Water Heater GAS ModelsRemoving the Old Water Heater Property Damage Hazard Facts to Consider About LocationBreathing Hazard Carbon Monoxide Gas Insulation BlanketsALL AIR from Inside Buildings Hotter Water can Scald Water PipingProperty Damage Hazard Installation Completed Using KITWater Damage Hazard Explosion HazardVenting Filling the Water HeaterFire and Explosion Hazard Gas PipingFire and Explosion Hazard Sediment TrapsGasisheavithanair andlNsoftieonthefiord EplacementoftheentirewaterheaterBEFORELiGHTiNGsmellaNiaroundtheapplian area For g Besuretosmellnextto thefor cause someTemperature Regulation Vent System Inspection Tank Sediment CleaningCarbon Monoxide and Fire Hard Burner InspectionUltra Low NOx Natural Gas Burner Removing the Burner Door AssemblyExternal Inspection & Cleaning of the Flame Arrestor Cleaning the Combustion Chamber and Flame ArrestorReplacing the Thermocouple Explosion Hazard Replacing the Burner Door Assembly Fire or Explosion HazardAnode Rod Inspection Removing and Replacing the Gas Control Valve/ThermostatHousekeeping Fire and Explosion HazardDraining Temperature-Pressure Relief Valve OperationDrain Valve Washer Replacement ServiceDraft Hood Operation Expansion Tank Sizing ChartStart Up Conditions Strange SoundsCondensation Smoke OdorAIR In Hot Water Faucets Insufficient HOT Water Slow HOT Water RecoveryCombustion Odors Drip from Relief ValveThermostat Fails to Shut OFFIvalve/thermstat? Section a Pilot light will not lightPower Miser TM 6 GAS Water Heater Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A Year Limited Warranty on Water Heater

153.330642, 153.33062, 153.330632, 153.330652 specifications

The Kenmore model series 153.330632, 153.330652, 153.33062, and 153.330642 represent a versatile lineup of washing machines designed to cater to a variety of laundry needs. Each model comes equipped with unique features and technologies aimed at enhancing the user's washing experience while ensuring reliability and performance.

One of the standout features across these models is their efficient water usage. Designed with modern technology, these machines incorporate advanced sensors that adjust the water level according to the load size. This not only conserves water but also contributes to lower utility bills, making them environmentally friendly options.

In terms of operation, the Kenmore models boast a range of wash cycles tailored to different fabric types and soil levels. From delicate items to heavy-duty fabrics, users can choose the appropriate cycle to ensure optimal cleaning without damaging their garments. The presence of a quick wash option is also a highlight, enabling users to clean lightly soiled items in a fraction of the time.

The Kenmore series is also designed for user convenience. Features such as a digital display control panel allow for intuitive operation. Users can easily select their desired settings and monitor the wash cycle progress. Additionally, the machines are equipped with a delay start function, which provides flexibility for users to schedule their laundry according to their convenience.

Another notable characteristic of these models is the installation of noise-reducing technologies. This minimizes operational sounds, allowing for quieter washing cycles, which is particularly beneficial for households with infants or those who prefer a tranquil environment.

Durability is a significant aspect of the Kenmore brand. Each machine in this series is constructed with high-quality materials designed to withstand the rigors of regular use. The stainless-steel tubs are resistant to chipping and snagging, ensuring that they maintain their efficiency over long periods.

In summary, the Kenmore models 153.330632, 153.330652, 153.33062, and 153.330642 are packed with features aimed at improving the laundry experience. With efficient water usage, versatile wash cycles, user-friendly controls, noise reduction technologies, and durable construction, these machines stand out as reliable choices for modern households seeking an effective laundry solution. As users navigate their laundry tasks, these washing machines promise to deliver performance while keeping convenience and sustainability at the forefront.
Top Page Image Contents