Miller Electric and DS-75D16, DS-75S16, DS-75S12 Installing Wire Guide Extension, Installing Guard

4-4. Installing Wire Guide Extension

1

	1	Wire Guide Fitting
	2	Bolt
	3	Monocoil Liner
	4	Wire Guide Extension
4	Tighten bolt to secure liner in wire
	guide fitting. Do not overtighten bolt

	3	and crush liner.
		Repeat procedure for opposite
2
		side.

Tools Needed:

3/8 in

ST-152 383

4-5. Installing Guard

1 Motor Mounting Bracket

2 Mounting Screws

Remove 4-screws from motor mounting bracket.

3 Guard

Secure guard using 4 screws pre- viously removed. For standard speed motor mount guard use mounting holes as shown.

1

This illustration shows the mounting screws in place for a standard speed motor. The remaining holes are used for low speed motors.

2

Tools Needed:

3 3/8 in

804 783-A

OM-230 300 Page 11