SECTION 3 − INTRODUCTION
3-1. Specifications
Type of Input | Welding Power | Wire Feed Speed | Wire Diameter | Welding Circuit | Weight | |
Power | Source Type | Range | Range | Rating | ||
| ||||||
|
|
|
|
|
| |
24 Volts AC | Constant Voltage (CV) |
| .023 To 5/64 in (0.6 | 100 Volts, | 12 ft (3.7 m): | |
| Standard: 50 To 1400 | To 2.0 mm) | 750 Amperes, 100% | 207 lb (94 kg) | ||
DC With |
|
| ||||
10 Amperes | ipm (1.3 To 35.6 mpm) |
| Duty Cycle |
| ||
voltage and current feedback | Max Spool Weight: | 16 ft (4.9 m): | ||||
50/60 Hertz |
|
| ||||
|
| 60 lb (27 kg) |
| 280 lb (127 kg) | ||
|
|
|
| |||
|
|
|
|
|
|
| 12 ft (3.7 m) Boom | 16 ft (4.9 m) Boom |
|
|
|
Maximum Height With 4 ft (1.2 m) Post | 17 ft (5.2 m) | 21 ft (6.4 m) |
|
|
|
Vertical Lift Of Boom | Horizontal to 60° Above Horizontal | Horizontal to 60° Above Horizontal |
|
|
|
NOTE
If feeder is used with a welding power source that does not provide voltage and current feedback through the
SECTION 4 − INSTALLATION
4-1. Installing Swivel Into Pipe Post
5
4
23
1
YDo not remove Safety Collar until instructed to.
1Swingpak Base or CBC Cart
2Pipe Post With Base
3Steel Bolt
Secure as shown using as a mini- mum 1/2 in diameter SAE grade 5 steel bolts.
4 Swivel Assembly
Insert into pipe post. Lubricate swivel.
5 Safety Collar
Tools Needed: 3/4 in
152
