!WARNING
Electrical Shock Hazard
Unplug power cord from electrical outlet. Do not operate the cleaner without the primary or exhaust fil- ters. Be sure the filters are properly installed to prevent motor failure and/or electrical shock.
__Filter
Cover Replace dust bin
L__ Handle lid by snapping
Hinge into place with handle hinges
aligned to tabs_
PRIMARY FILTER
The filter CANNOT be washed as it wilt
lose its dust trapping ability.
Check primary filter frequently and clean when dirty.
TO REMOVE PRIMARY FILTER:
Remove the dust bin and dust bin lid
assembly as outlined in the DUST BIN CLEANING section.
Replace the dust bin as outined in the DUST BIN CLEANING section°
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be replaced when dirty. It should be replaced regularly depending on use conditions. The filter CANNOT be washed as it will lose its dust trapping ability.
Remove fil-
ter cover by pushing in
Cover
NOTE: See PARTS AND FEATURES for the exhaust filter part number.
Press inward on | Press |
at tabsTab
each side of | Inward |
located
beneath handle hinges, and lifting off.
Side Also)
exhaust filter | Exhaust | |
Filter | ||
cover | and pull |
|
out to | remove |
|
from vacuum |
| |
cleaner |
| |
DUST BIN LID ASSEMBLY
Filler
Handle
Grasp filter handle and lift out.
Filter
Clean primary filter by
gentiy tapping over a trash container.
TO REPLACE | PRIMARY | FILTER: | |
Replace filter | and | Slots | |
rotate | it until handle |
| |
drops | into the | slots° |
|
Check | sliders | and |
|
remove | any obstruc- |
| |
tions |
|
|
|
Exhaust | Remove the |
Filter | exhaust filter car_ |
tridge.
Replace the exhaust filter cartridge, carefully posi- tioning it so that it fits into the motor cover, The grey edge of the filter should be facing away from the operator. Push only on fil- ter cartridge frame, not on filter itself.
Replace the exhaust filter cover by placing tabs in slots and pushing in until cover snaps into place°
15