Kenmore 116.31721 owner manual Handle Assembly

Page 5

Before assembling vacuum, check the PACKING LIST on the cover of the separate Repair Parts List_ Use this list to verify that you have received all the components of your new Kenmore vacuum.

R WARNING

Electrical Shock Hazard

Do not plug into the electrical sup-

ply until the assembly is complete. Failure to do so could result in elec-

trical shock or injury.

HANDLE ASSEMBLY

Remove the screw located just below the

top edge of the back of the vacuum.

Position the handle as shown in the illustra- tion below,

While holding the power cord out of the way, slide the handle into the opening at the top of the vacuum°

Hand_

Handle

Screw

Hole

Insert the screw so it passes through the handle into the vacuum°

Begin to tighten the screw with your fingers. It may be necessary to adjust the handle slightly,

Image 5

Contents Part No. CO1ZBJBODUOO-8191917 Vacuum CleanerOperating Requesting Assistance Or ServiceLimited ONE Year Warranty on Kenmore Vacuum Cleaner Care when Do notCanada Attachments2O-40600 Belt 20-5275 20-40096Handle Assembly Attachment Assembly Cord AssemblySuggested Pile Height Settings To select a pile height settingSome Models Models with two 2 positionsHandle Release Pedal To Store Attachments To USE AttachmentsBetween Furniture Cushions* Drapes Extension HoseSome Models To correct Problem Performance IndicatorMotor Protection StairsStore Cleaner To Remove Dust BIN To Clean PRE-FILTERTo Empty Dust BIN Every time dust bin is removed, rotate Dust bin at leastTo Replace Dust BIN Check secondary filter frequently and clean when dirtyDo not wash in the dishwasher Do not install damp Exhaust Filter Primary FilterGrasp filter handle and lift out TridgeTo Remove Nozzle Cover To Remove BELT/CLEAN AgitatorHeavy To Replace BeltModerate LightInlet ChangingRounding plastic parts CAuTI0Agitator Cleaning Belt Changing and Agitator CleaningTo Replace Agitator To Check AgitatorCleaner picks up Www,sears,corn