Review this chart to find
WARNING Electrical Shock Hazard
IDisconnect electrical supply before servicing or cleaning the unit, Failure
to do so could result in electrical shock or personal injury. | , iiiii iiiiii i ,, |
Cleaner won'trun. | 1. | Unplugged at wall outlet. |
| I. | Plug in firmly, push on/off switch to on | |||||||
| 2. | Tripped | circuit breaker/blown | fuse | 2. | Reset circuit breaker or replace fuse, | ||||||
|
| at household | service | panel |
|
|
| |||||
| 3. | On/off |
| switch | not | turned | on. | 3. | Push onibff switch to on. | |||
| 4. | Thermal | protector | tripped. |
| 4. | Reset thermalprotector,(page 11) | |||||
Poor job of dirt | 1. | Ful! or clogged | dust | bin |
|
| 1. | CIean dust bin, (pages 13, 14), | ||||
| 2. | Wrong | pile height | setting, |
| 2o | Adjust setting, (page 7) | |||||
| 3. | Worn | agitator |
|
|
|
|
|
| 3. | Replace agitator, (page 20). | |
| 4. | Clogged | nozzle | or | dust | bin | port | 4. | Check CLOG REMOVAL, (page !8) | |||
| 5. | Clogged | hose, |
|
|
|
|
| 5. | Check for clogs, (page 18) | ||
| 6_ | Hole | in hose |
|
|
|
|
|
| 6,, | Replace hose | |
| 7. | Broken/misplaced |
| belt |
|
| 7,, | Replace/fix belt, (pages 16, 17) | ||||
| 8, | Hose | not inserted | fully |
|
| 8, | Insert hose fully, (page 6). | ||||
| 9. | Motor | proteclion | system | activated | 9. | Check for clogs, (page 18), | |||||
| !Oo | Dirty | filters |
|
|
|
|
|
| t0, | Clean/change filters, (page I5) | |
| 11_ | Sliders | not rotating, |
|
|
| t!. | Remove obstructions, (page 15)., | ||||
Cleaner picks up | 1, | Wrong | pile height | setting |
|
| 1. | Adjust setting, (page 7) | ||||
moveable rugs or |
|
|
|
|
|
|
|
|
|
|
|
|
pushes too hard. |
|
|
|
|
|
|
|
|
|
|
|
|
Light won'twork. | 1, | Burned | out light bulb, | |
Agitator does not turn. | 1,, | Broken | belt | |
| 2. | Bare | floor selector in bare | |
|
| floor | setting | |
| 3, | Belt | installed incorrectly. | |
Performance indicator, | I, Full or cloggeddust bin. | |||
some models, is red. | 2. | Dirty filters., | ||
| 3o | Clogged airflow passage | ||
| 4. | Certain attachment tools | ||
Alr flow restricted | 1o | Attachment use restrictsair flow | ||
with attachment use. | 2o | New carpet fuzz clogged air path | ||
Sound changes. |
|
|
|
|
t.Change light bulb, (page 19).
1÷ Replace belt, (pages 16, 17)
2.Move selector to the carpet setting, (page 7)
3.Check BELT CHANGING AND AGITATORCLEANING, (pages 16, 17)
In Clean dust bin, (pages 13, t4),
2.Clean/change filters, (page I5)
3.Clear clogfrom airflow passage, (page 18).
4_ This is normal, Light should go off when tool is removed,
1.Check ATTACHMENTS, (page 8)
2.Check CLOG REMOVAL and clean hose, (page t8).
21