Kenmore 116.31721 owner manual To USE Attachments, To Store Attachments

Page 9

!WARNING

Personal Injury Hazard and Property Hazard

DO NOT place hands or feet under- neath the unit at any time. When using attachments, the agitator con- tinues rotating. Do not allow the cleaner to remain in just one place for a period of time as the agitator may damage the floor surface.

Avoid placing the cleaner on furni- ture, the fringed area of rugs, deep pile carpeting, or carpeted stairs.

The ideal position for the cleaner when using attachments is for the unit to be on a level area with the handle in the full upright position.

TO USE ATTACHMENTS:

Place the cleaner on a flat surface, and move the height adjustment to HIGH.

The attachments wilt fit on the hose or the

wand. In addition, the dusting brush or combination brush will also fit on the crevice tool.

The hose and wand can be pulled off the short hose by grasping the cuff and twisting while pulling up.

CAUTION

The attachments can be added to the hose if the item to be cleaned is not far from the cleaner.The hose on some models will expand.

NOTE: When cleaner is turned on, the hose on some models will have a tendency to collapse due to suction of the cleaner.

If more reach is needed, the wand can be attached to the hose and the attachments can be added to the wand.

!CAUTION

When using attachments, be careful not to overextend the hose length when reaching. Trying to reach beyond the hose reach could cause the cleaner to tip over.

SOME MODELS

An extra wand, without tabs, is included. This extra wand can be added to the wand with tabs for extra reach,. Insert wand and twist a quarter of a turn to secure fit.

 

 

Crevice

Tool

-f--

Dusting

Brush

 

 

Wand

(Some Models)

_

 

 

Combination

__

 

 

Brush

(Some

_ \

_

I .

Models)

___

t_rusn

If the dusting brush/combination brush is being used and more distance is needed, the crevice tool can be added to the wand, then the dusting brush/combination brush can be added to the crevice tool.

TO STORE ATTACHMENTS

Return the hose to its position on the short hose and the attachments to their holders.

Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until

they are washed. They could leave marks.

Image 9
Contents Part No. CO1ZBJBODUOO-8191917 Vacuum CleanerRequesting Assistance Or Service Limited ONE Year Warranty on Kenmore Vacuum CleanerOperating Care when Do notCanada Attachments2O-40600 Belt 20-5275 20-40096Handle Assembly Attachment Assembly Cord AssemblySuggested Pile Height Settings To select a pile height settingSome Models Models with two 2 positionsHandle Release Pedal To Store Attachments To USE AttachmentsExtension Hose Some ModelsBetween Furniture Cushions* Drapes To correct Problem Performance IndicatorMotor Protection StairsStore Cleaner To Remove Dust BIN To Clean PRE-FILTERTo Empty Dust BIN Every time dust bin is removed, rotate Dust bin at leastCheck secondary filter frequently and clean when dirty Do not wash in the dishwasher Do not install dampTo Replace Dust BIN Exhaust Filter Primary FilterGrasp filter handle and lift out TridgeTo Remove Nozzle Cover To Remove BELT/CLEAN AgitatorHeavy To Replace BeltModerate LightInlet ChangingRounding plastic parts CAuTI0Agitator Cleaning Belt Changing and Agitator CleaningTo Replace Agitator To Check AgitatorCleaner picks up Www,sears,corn