Kenmore 116.28615 owner manual Canister, Hood and Tool Storage Cover, Hose, Tab, To remove

CANISTER

1, Open the canister hood,,

2.Check to see that the dust bag is proper- ty installed. See BAG CHANGING for instructions.,

3.Check to see that the motor safety filter is

properly installed, See MOTOR SAFETY FILTER CHANGING for instructions.,

HOOD AND TOOL

STORAGE COVER

It is normal for the canister hood and tool storage cover to come off when opened fur- ther than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstaE

CAUTION

Never open canister hood with the tool storage cover open. This will help to prevent damage from occurring to the canister hood and/or tool storage cover.

HOSE

1.Line up the hose latch tab and notch

in canister hood and insert hose into canister until it snaps in place.

To remove: Lift hose latch tab

upward and pull up on hose_

Handle

Lock

Button

Handle

Quick

Hose

Latch

Tab

Notch

2.Insert handle into wand until lock button

snaps in place Be sure hose

is not twisted.

To remove:

Press handle quick release button and pull up on handle_

This canister is equipped with an on-board storage area for a Pet PowerMate attachment.

To Install:

Open the Pet PowerMate storage cover. Insert the Pet PowerMate, press down into place, and close the lid securely.

To Remove:

Open the storage cover. Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and

ATTACHMENT USE TABLE)°

To store: Disconnect hose from wands and canister to prevent stress on hose during storage° Store hose in a loosely coiled position so the hose covering is not stressed.

Pet PowerMate

Storage Cover

/