Kenmore 78122 owner manual HOW to Install, Slide the unit out of the cabinet by gripping, Bolt

HOW TO INSTALL

aRemove the screws which fasten the cabinet at both sides and at the back.

FIG. 3

B Slide the unit out of the cabinet by gripping the

base pan handle and pull forward while bracing the cabinet.

FIG. 4

BCut the FOAM-PE _) to fit the underside of the window sash. Peel off the backing and attach the seal as shown in Fig. 5.

FIG. 5

L_'lJRemove the backing from the FOAM-PE _) and attach to the bottom of the upper guide (_.

FIG. 6

_"t Screw the upper guide (_ to the top of the cabinet as shown in FIG. 7 using (3) TYPE A screws _. Insert the side curtain (_ into the upper guide (_ and lower guide of the air conditioner. Fasten the curtains to the unit with (8) TYPE A screws _).

,(TYPEA) FIG. 7

r_open the window. Mark a line on center of the window stool (or desired air conditioner location). Carefully place the cabinet on the window stool and align the center mark on the angle front with the center line marked in the window stool.

Windowstod

FIG. 8

UPull the bottom window sash down behind the upper guide until it meets.

NOTE: Do not pull the window sash down so tightly that the movement of side curtain is restricted.

WINDOW SASH UPPER GUIDE _)

SIDE CURTAIN(_

FIG. 9

B Loosely assemble the sill supports using the

parts in FIG. 10.

INDOOR_		/-f,..,.---_--_== OUTDOOR
_"=	_	,911S_rt(pp0=*
	Bolt(_)	FIG. 10

-6-