Kenmore 78122 owner manual Sorow

I1_1 Select the position that will place the sill

supports near the outermost point on sill (FIG. 11). Attach the sill supports to the cabinet track hole closest to the selected position using TYPE A

screw (_.

Screw(Type A)(_)

_1_ Place the sill supports with the cabinet on the

window sill'sselected position.

lill The cabinet should be installed with a very

slight tilt (about 1/2") downward toward the outside (FIG. 12).

Adjust the bolts and the nuts of sill supports to level the cabinet.

SiltSupport_) FIG. 12

_1 Attach the cabinet to the window stool by

driving the TYPE B screws (_)through the front angle into window stool.

Track

	Front Angle
	Screw(Type B) (_)
Sill Support (_)	FIG. 13

BPull the window sash down behind the upper

guide. Pull each side curtain fully to each sash track.

i]_'l Attach each side curtain to the window sash

using TYPE C screws (_. (FIG. 14)

lltrU . (Type C) (_

Sorow

_'f FIG. 14

BAttach the window locking bracket _) with

TYPE C screw _). (FIG. 15)

FIG. 15

ir_ Slide the chassis into the cabinet. (FIG. 16)

CAUTION: For security purpose, reinstall screws at cabinet'ssides.

	Power
Screw
Screw	FIG. 16

_-_Cut the foam seal _) to the proper length and insert between the upper window sash and the lower window sash. (FIG. 17)

FIG. 17

i}_] The vent control handle must be straightened before the decorative front is attached.

Pull down part _;) to align with part ®.

Part

FIG. 18

-7-