Installation Instructions (cont'd)
Converting the Lower
Element (cont'd)
9. Replace | terminal | cover on | thermostat making sure that the | 12. Complete | wiring to | the | water | heater, | or if completed, | turn | |
locking | tabs on | the terminal | cover are in place. | "ON" | electric power | to | the | water | heater after filling | the | |
|
|
|
| tank | with | water. |
|
|
|
|
|
_E,WARNING
Make sure the thermostat is flush against the tank, the terminal cover is in place, and the insulation _sreplaced. Failure to do so can result in DEATH, SERIOUS BODILY NJURY,OR PROPERTY DAMAGE.
10.Replace the insulation block so that it completely covers the thermostat and element.
_, CAUTION
Never use this water heater unlessit is completely full of water. To prevent damage to the tank and heating ele- ment, the tank must be filled with water. Water must flow from the hot water faucet before turning "ON" power.
11. Replace the access panel.
12