Harman Stove Company HB 38 DV Changing to LP, LP Conversion Kit, Top Vent LP Kit Rear Vent LP Kit

Page 25

Only For Qualified Installers

INSTALLATION

Changing to LP

Remove Screw

Remove

5 Flame Bridge

3Remove Orifice Cover

Remove Rear Burner by sliding to the left.

1Remove screw

2Remove Air Deflector

7Lift up on front of burner/grate/

screen assembly and then slide left about 1/2”. The assembly can then be removed.

LP Conversion Kit

LP Orifice Box Cover

		LP Pilot Orifice
	LP Rear Orifice.	LP Front Orifice #52
	LP Rear Orifice.	LP Conversion label
	#60 Rear Flue,	LP Conversion label
	#59 Top Flue.
	8	LP Valve
	Remove pilot tower	Conversion
	Remove pilot tower	Module
	with a 7/16” wrench.	Module
	with a 7/16” wrench.
	Replace Natural Gas
	orifice with LP	LP Conversion
	orifice.	Instructions

Top Vent LP Kit	Part No. 1-00-08770
Rear Vent LP Kit	Part No. 1-00-08771

These kits are only for use in the Serenity series fireplaces. Note: The difference between the top and rear LP kit is the size of the rear orifice (#59 for top and #60 for rear).

Image 25

Contents Harman Built Serenity HB 38 DV Safety NoticeForyour Safety Table of Contents Introduction Air Gate Blower System 200% To 300% More Air Important FeatureBlower Off Blower OnOperation OperationPilot Flames HOW to Turn OFF the FireTop Vent Rear Vent SpecificationsThis fireplace may be placed on a wood floor Minimum Clearances from Combustible ConstructionRear Vent Corner Top Vent Installation Options InstallationTypical Tile Facing Sectional View Placement InstallationNoncombustible Removing The Arch Face Installing The Arch FaceAssembling the Victorian Face Installing Fireplace To use Victorian Face Mounting The Victorian Face Making The Connection Burn Only the Fuel for which the Heater is EquippedGas Pressure Requirements Natural GasPart Numbers for SimpsonDura-Vent Pipe and Fittings Use Only Approved Venting8 x Description Venting with 8 x 5 Pipe VentingRear Vent Model Approved. Never used 6 5/8 x 4 pipe for rear VentVenting with 6 5/8 x 4 Pipe Into a wallor siding Feet 2 to Damper SettingsLP Conversion Kit Changing to LPTop Vent LP Kit Rear Vent LP Kit Top Rear Vent NaturalFront Rear Log Placement Connecting Optional Thermostat Installation OptionsRegister Kit Optional Remote Register KitFloor Kit Wall KitOptional Wall Register Kit Installing Damper AssemblyMount register after drywall and painting are finished Floor Register Installation Installing the Floor Register Fireplace is turned off and cools Not allow the register blower to start ifCleaning the Glass MaintenanceCleaning the Log Set and Firebox Removing the Glass FrontAir Flow Cleaning the BurnersLubrication Maintenance Verify proper operation after servicing WHI # Replacement Parts Propane Natural GasYes Trouble ShootingBad Replace Pirzo Ignitor Turn on gas valve Replenish supplyGood Pilot does not stay litCheck inlet pressure Correct inlet pressureIs Pilot lit Rear burner does not light Bad Install new batteriesCheck batteries Replace solinoidLife Time

HB 38 DV specifications

The Harman Stove Company HB 38 DV is a high-performance direct vent pellet stove that is designed to meet the needs of homeowners seeking efficient and effective heating solutions. This stove is renowned for its combination of advanced technology, sleek design, and user-friendly features, making it a popular choice for both aesthetic appeal and functional heating.

One of its key features is the patented Harman burn pot design, which ensures an even burn and maximum heat output. The burn pot is engineered to minimize clinkering, allowing users to enjoy longer burn times and less frequent maintenance. The HB 38 DV not only heats efficiently but does so while using environmentally friendly wood pellets, promoting a sustainable approach to home heating.

The stove is equipped with an advanced microprocessor-controlled smart technology system. This system automatically adjusts the burn rate to match the desired temperature settings, providing optimal comfort while maintaining energy efficiency. Users can simply set their desired temperature, and the stove will automatically adjust the feed rate and combustion air to maintain that level, reducing the need for constant adjustments.

The Harman HB 38 DV also features a large viewing window, providing an inviting visualization of the flames while contributing to the room's ambiance. The stay-cool handle allows for ease of opening the door without the risk of burns. The stove is available in several finishes allowing homeowners to select a style that complements their decor.

In terms of efficiency, the HB 38 DV boasts an impressive efficiency rating of over 85%. This means that more of the fuel is converted into usable heat, leading to reduced heating costs and fewer emissions. The unit has a powerful blower that effectively distributes heat throughout the room, ensuring that the warmth is felt quickly and evenly.

The installation process is flexible due to its direct vent capability, allowing for venting through walls or ceilings. This feature enables users to install the stove in various locations within their home, maximizing both functionality and style.

In summary, the Harman Stove Company HB 38 DV combines advanced technology, efficient heating, and modern design, making it a standout option for homeowners looking for a dependable and attractive pellet stove. Its various features cater to both performance and aesthetic preferences, positioning it as a leading choice in contemporary heating solutions.