Harman Stove Company HB 38 DV manual Vent Natural, Top Rear, Front Rear

Page 26

Only For Qualified Installers

INSTALLATION

 

 

 

 

Remove Orifices with a 1/2” wrench

9

Orifice Chart

 

 

or deep well socket. The larger

Vent

Natural

Propane

orifice always goes to the front.

 

 

Front

Rear

Front

Rear

 

Top

31

51

52

59

 

Rear

32

51

52

60

10Replace Orifices with the proper size shown in the Orifice Chart.

11

Remove two screws and place Control Panel to the left.

Note: The higher the orifice number the smaller hole in the tip. For example, a number 52 oifice has a larger hole than a number 60 orifice.

12Read instructions packed with LP Change-over Kit.

13

Remove three screws to change knob assembly. Install LP knob assembly in place of the NG assembly. Be sure screws are tight.

14

Place conversion sticker (provided in Kit) on bottom of valve. This is to permanently mark the valve that it has been converted to LP. This label is important in the event that the valve is ever removed and mixed in with other valves.

Mark the proper box on the control panel with a permanent

15marker. Note: If no conversion is made, the box for the proper fuel must still be marked.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Safety Notice Harman Built Serenity HB 38 DVForyour Safety Table of Contents Introduction Blower Off Important FeatureAir Gate Blower System 200% To 300% More Air Blower OnOperation OperationHOW to Turn OFF the Fire Pilot FlamesSpecifications Top Vent Rear VentMinimum Clearances from Combustible Construction This fireplace may be placed on a wood floorRear Vent Corner Top Vent Typical Tile Facing Sectional View InstallationInstallation Options Installation PlacementNoncombustible Installing The Arch Face Removing The Arch FaceAssembling the Victorian Face Installing Fireplace To use Victorian Face Mounting The Victorian Face Gas Pressure Requirements Burn Only the Fuel for which the Heater is EquippedMaking The Connection Natural Gas8 x Description Use Only Approved VentingPart Numbers for SimpsonDura-Vent Pipe and Fittings Rear Vent Model VentingVenting with 8 x 5 Pipe Approved. Never used 6 5/8 x 4 pipe for rear VentVenting with 6 5/8 x 4 Pipe Into a wallor siding Damper Settings Feet 2 toTop Vent LP Kit Rear Vent LP Kit Changing to LPLP Conversion Kit Front Rear Vent NaturalTop Rear Log Placement Installation Options Connecting Optional ThermostatFloor Kit Optional Remote Register KitRegister Kit Wall KitInstalling Damper Assembly Optional Wall Register KitMount register after drywall and painting are finished Floor Register Installation Installing the Floor Register Not allow the register blower to start if Fireplace is turned off and coolsCleaning the Log Set and Firebox MaintenanceCleaning the Glass Removing the Glass FrontLubrication Cleaning the BurnersAir Flow Maintenance Verify proper operation after servicing WHI # Replacement Parts Natural Gas PropaneBad Trouble ShootingYes Replace Pirzo Ignitor Turn on gas valve Replenish supplyCheck inlet pressure Pilot does not stay litGood Correct inlet pressureIs Pilot lit Check batteries Bad Install new batteriesRear burner does not light Replace solinoidLife Time

HB 38 DV specifications

The Harman Stove Company HB 38 DV is a high-performance direct vent pellet stove that is designed to meet the needs of homeowners seeking efficient and effective heating solutions. This stove is renowned for its combination of advanced technology, sleek design, and user-friendly features, making it a popular choice for both aesthetic appeal and functional heating.

One of its key features is the patented Harman burn pot design, which ensures an even burn and maximum heat output. The burn pot is engineered to minimize clinkering, allowing users to enjoy longer burn times and less frequent maintenance. The HB 38 DV not only heats efficiently but does so while using environmentally friendly wood pellets, promoting a sustainable approach to home heating.

The stove is equipped with an advanced microprocessor-controlled smart technology system. This system automatically adjusts the burn rate to match the desired temperature settings, providing optimal comfort while maintaining energy efficiency. Users can simply set their desired temperature, and the stove will automatically adjust the feed rate and combustion air to maintain that level, reducing the need for constant adjustments.

The Harman HB 38 DV also features a large viewing window, providing an inviting visualization of the flames while contributing to the room's ambiance. The stay-cool handle allows for ease of opening the door without the risk of burns. The stove is available in several finishes allowing homeowners to select a style that complements their decor.

In terms of efficiency, the HB 38 DV boasts an impressive efficiency rating of over 85%. This means that more of the fuel is converted into usable heat, leading to reduced heating costs and fewer emissions. The unit has a powerful blower that effectively distributes heat throughout the room, ensuring that the warmth is felt quickly and evenly.

The installation process is flexible due to its direct vent capability, allowing for venting through walls or ceilings. This feature enables users to install the stove in various locations within their home, maximizing both functionality and style.

In summary, the Harman Stove Company HB 38 DV combines advanced technology, efficient heating, and modern design, making it a standout option for homeowners looking for a dependable and attractive pellet stove. Its various features cater to both performance and aesthetic preferences, positioning it as a leading choice in contemporary heating solutions.
Top Page Image Contents